Common Network Port Numbers Flashcards: Protocols, TCP/UDP & Uses
Study 88 cards on common network ports, TCP/UDP transports, service uses, port ranges, and practical protocol distinctions.
Sellest kaardipakist
Build a practical map of common network service ports with 88 independently authored cards. Twelve foundation and distinction cards cover port roles, IANA ranges, independent TCP and UDP namespaces, assignment limits, conventional versus configured ports, client source ports, DNS transport behavior, DHCP endpoints, FTP channels, and common implicit-TLS pairs.
The remaining 76 cards practice 38 mappings in both useful directions: service → conventional or registered port, transport, and concise use; and port/transport → service and concise use. Coverage includes FTP control and active-mode data, SSH/SFTP, Telnet, SMTP relay, DNS, DHCPv4 server and client endpoints, TFTP, HTTP, Kerberos, POP3, NTP, the three NetBIOS services, IMAP, SNMP queries and notifications, BGP, LDAP, HTTPS including HTTP/3, direct-hosted SMB, IKE, syslog, SMTP submission, LDAPS, IMAPS, POP3S, Microsoft SQL Server, L2TP, PPTP, RADIUS authentication, MySQL, RDP, IPsec NAT Traversal, SIP, and PostgreSQL.
This is a focused recall deck, not a copy of the full IANA registry. It excludes exhaustive assignments, port-scanning or attack instructions, firewall policy, every vendor-specific alternate, dynamic service-discovery inventories, and the claim that a port number proves which application produced observed traffic. Registered, default, conventional, and common-use wording stays explicit because services can be reconfigured or negotiated elsewhere.
The sequence establishes the port model first, then mixes web, email, infrastructure, remote-access, file-transfer, network-management, directory, VPN, voice, Windows, and database families. Opposite directions for the same mapping stay at least 38 intervening cards apart. Near-duplicate DNS, DHCP, FTP, SNMP, NetBIOS, and IPsec cues keep at least three unrelated cards between them, and the TLS-pair distinction stays at least three unrelated cards from its closest overlapping mapping. The review scheduler handles continued spacing after installation.
Open Study Contributor independently authored the prompts, answers, mapping choices, organization, metadata, and cover from common networking knowledge checked against the current IANA Service Name and Transport Protocol Port Number Registry, relevant RFCs, and official vendor documentation. Organization and product names identify protocols, services, or sources only; no affiliation or endorsement is claimed. No competitor card text, certification questions, answer keys, course text, or source prose was copied.
The CC0 label applies to the original prompts, answers, organization, metadata, and generated cover to the extent applicable rights exist. It does not claim ownership of protocol facts, standards, organization names, product names, or third-party source material.
Selle kaardipaki kaardid
Kaart 1
Küsimus
What does a transport-layer port number identify?
Vastus
An application endpoint within a host for one transport protocol. The IP addresses, transport protocol, and source and destination ports together identify a communication flow.
Kaart 2
Küsimus
Are TCP port 53 and UDP port 53 the same port?
Vastus
No. TCP and UDP have independent 16-bit port namespaces, so 53/TCP and 53/UDP are separate transport endpoints.
Kaart 3
Küsimus
What is the IANA System Port range?
Vastus
0–1023. These are also called Well-Known Ports and are assigned by IANA under the stricter System Port procedures.
Kaart 4
Küsimus
What is the IANA User Port range?
Vastus
1024–49151. These are also called Registered Ports and may be assigned by IANA to services.
Kaart 5
Küsimus
What is the IANA Dynamic or Private Port range?
Vastus
49152–65535. IANA does not assign ports in this range; systems commonly use it for temporary or private endpoints.
Kaart 6
Küsimus
Does an IANA port assignment prove what observed traffic is—or that it is safe?
Vastus
No. A registration is a naming convention, not traffic identification, authorization, or a security verdict. Verify the actual protocol and context.
Kaart 7
Küsimus
Must a service use its registered or conventional port?
Vastus
No. Administrators and applications can choose another port, negotiate one dynamically, or discover it through mechanisms such as DNS SRV records.
Kaart 8
Küsimus
What port roles are typical in a client-server connection?
Vastus
The server usually listens on a known destination port, while the client uses a temporary source port. Either side can be configured differently.
Kaart 9
Küsimus
SSH and SFTP — common server port and transport?
Vastus
TCP 22. SSH provides encrypted remote access, and SFTP normally runs as a subsystem inside the same SSH connection.
Kaart 10
Küsimus
53/UDP or 53/TCP — which service?
Vastus
DNS. Routine queries often use UDP, while full DNS implementations also support TCP; zone transfers use TCP.
Kaart 11
Küsimus
SMTP relay between mail servers — common port and transport?
Vastus
TCP 25. SMTP uses it for server-to-server mail transfer; user mail submission normally uses port 587 or implicit TLS on 465.
Kaart 12
Küsimus
HTTP without TLS — conventional port and transport?
Vastus
TCP 80 for conventional HTTP/1.1 and HTTP/2 connections. The service can be configured on another port.
Kaart 13
Küsimus
67/UDP — which DHCPv4 endpoint?
Vastus
The DHCPv4 server endpoint. Clients send server-directed DHCP messages to UDP port 67.
Kaart 14
Küsimus
21/TCP — which service and channel?
Vastus
FTP control. It carries commands and replies; file data uses a separate connection.
Kaart 15
Küsimus
SNMP requests and responses — common agent port and transport?
Vastus
UDP 161. Managers commonly send queries to an SNMP agent there; other SNMP transports exist.
Kaart 16
Küsimus
1433/TCP — which database service?
Vastus
Microsoft SQL Server's default instance. TCP 1433 is the default Database Engine port, but named or custom instances may use another port.
Kaart 17
Küsimus
23/TCP — which remote-access protocol?
Vastus
Telnet. It provides a plaintext remote terminal session and does not protect credentials or traffic with encryption.
Kaart 18
Küsimus
NTP — usual port and transport?
Vastus
UDP 123. NTP normally uses UDP for time synchronization; IANA also has a TCP 123 registration, but that is not the usual NTP transport.
Kaart 19
Küsimus
Why must a general-purpose DNS implementation support both UDP and TCP?
Vastus
UDP handles most routine queries efficiently, while TCP handles cases such as zone transfers and responses that do not fit the chosen UDP path. Both use port 53.
Kaart 20
Küsimus
POP3 — conventional port and transport?
Vastus
TCP 110. POP3 retrieves mail; it can upgrade with STLS, while implicit TLS uses TCP 995.
Kaart 21
Küsimus
443/TCP or 443/UDP — which web service?
Vastus
HTTPS. HTTP/1.1 and HTTP/2 normally use TLS over TCP 443; HTTP/3 uses QUIC over UDP 443.
Kaart 22
Küsimus
DHCPv4 client endpoint — port and transport?
Vastus
UDP 68. Servers send client-directed DHCPv4 messages to port 68.
Kaart 23
Küsimus
69/UDP — which file-transfer protocol?
Vastus
TFTP. A client sends the initial read or write request to UDP 69; the transfer then continues with a server-selected UDP transfer identifier.
Kaart 24
Küsimus
162/UDP — which network-management traffic?
Vastus
SNMP notifications, traditionally called traps. Notification receivers commonly listen on UDP 162.
Kaart 25
Küsimus
MySQL classic protocol — default port and transport?
Vastus
TCP 3306. It is the default for classic MySQL client-server connections and can be reconfigured.
Kaart 26
Küsimus
How do FTP control, active-mode data, and passive-mode data ports differ?
Vastus
Control uses TCP 21. The server side of the default active-mode data connection uses TCP 20, while passive mode negotiates another server port.
Kaart 27
Küsimus
3389/TCP or 3389/UDP — which remote-desktop service?
Vastus
Microsoft Remote Desktop Protocol (RDP). TCP and UDP 3389 are the standard defaults, and the listening port can be changed.
Kaart 28
Küsimus
Syslog's conventional UDP transport — port?
Vastus
UDP 514. Classic syslog over UDP has no delivery guarantee; TCP 514 is registered to the shell service, not syslog.
Kaart 29
Küsimus
How do DHCPv4 server and client ports pair up?
Vastus
UDP 67 is the server port, and UDP 68 is the client port. Client-to-server messages target 67; server-to-client messages target 68.
Kaart 30
Küsimus
IMAP — conventional port and transport?
Vastus
TCP 143. IMAP accesses and manages mail on a server; implicit TLS uses TCP 993.
Kaart 31
Küsimus
445/TCP — which file-sharing service?
Vastus
Direct-hosted SMB. Modern SMB servers commonly listen on TCP 445 without the older NetBIOS session layer.
Kaart 32
Küsimus
88/UDP or 88/TCP — which authentication protocol?
Vastus
Kerberos. Clients and Key Distribution Centers support both transports; TCP also handles requests or replies too large for UDP.
Kaart 33
Küsimus
FTP's default active-mode data connection — server-side port and transport?
Vastus
TCP 20. This is the server's default source port for active-mode data; passive FTP negotiates another server port.
Kaart 34
Küsimus
BGP — standard operational port and transport?
Vastus
TCP 179. RFC 4271 defines BGP peer sessions over TCP; IANA separately retains a UDP 179 registry entry.
Kaart 35
Küsimus
5432/TCP — which database service?
Vastus
PostgreSQL. TCP 5432 is the customary default server port, but an installation can choose another port.
Kaart 36
Küsimus
IKE for IPsec — initial port and transport?
Vastus
UDP 500. IKE normally begins there; NAT traversal commonly moves subsequent IKE and encapsulated ESP traffic to UDP 4500.
Kaart 37
Küsimus
NetBIOS Name Service — common port and transport?
Vastus
UDP 137. It supports NetBIOS name registration and lookup; direct-hosted modern SMB does not require it.
Kaart 38
Küsimus
587/TCP — which email role?
Vastus
SMTP message submission. Mail clients normally submit outgoing mail to a submission server there, often with STARTTLS; server relay remains on TCP 25.
Kaart 39
Küsimus
389/TCP — which directory protocol?
Vastus
LDAP. Ordinary connection-oriented LDAP commonly uses TCP 389; IANA also registers UDP 389 for connectionless LDAP.
Kaart 40
Küsimus
L2TP — common port and transport?
Vastus
UDP 1701. L2TP carries tunnel control and data but does not provide encryption by itself; deployments often pair it with IPsec.
Kaart 41
Küsimus
138/UDP — which NetBIOS service?
Vastus
NetBIOS Datagram Service. It carries connectionless NetBIOS datagrams, historically used in NetBIOS over TCP/IP environments.
Kaart 42
Küsimus
IMAPS — default port and transport?
Vastus
TCP 993. It starts IMAP with an immediate TLS handshake for encrypted mail access.
Kaart 43
Küsimus
636/TCP — which directory-service convention?
Vastus
LDAPS, the commonly used implicit-TLS port for LDAP. LDAP can also negotiate TLS on TCP 389.
Kaart 44
Küsimus
1723/TCP — which VPN control protocol?
Vastus
PPTP control. PPTP uses TCP 1723 for control, while tunneled PPP data travels in GRE—not on TCP or UDP port 47.
Kaart 45
Küsimus
NetBIOS Session Service — common port and transport?
Vastus
TCP 139. It provides connection-oriented NetBIOS sessions and historically carried SMB before direct-hosted SMB on TCP 445.
Kaart 46
Küsimus
995/TCP — which mail-access service?
Vastus
POP3S. It starts POP3 with an immediate TLS handshake for encrypted mail retrieval.
Kaart 47
Küsimus
RADIUS authentication and authorization — standard port and transport?
Vastus
UDP 1812. RADIUS accounting normally uses the separate UDP port 1813.
Kaart 48
Küsimus
IPsec NAT Traversal — port and transport?
Vastus
UDP 4500. It carries IKE and UDP-encapsulated ESP when NAT traversal is in use.
Kaart 49
Küsimus
5060/UDP or 5060/TCP — which signaling protocol?
Vastus
SIP. It commonly uses UDP or TCP 5060 for session signaling; SIP over TLS conventionally uses TCP 5061.
Kaart 50
Küsimus
Which common dedicated ports distinguish plaintext or STARTTLS-capable services from implicit-TLS variants?
Vastus
HTTP 80 ↔ HTTPS 443; IMAP 143 ↔ IMAPS 993; POP3 110 ↔ POP3S 995; LDAP 389 ↔ LDAPS 636. A port alone does not prove that TLS is configured correctly.
Kaart 51
Küsimus
22/TCP — which secure remote-access service?
Vastus
SSH. It supports encrypted remote login, command execution, tunneling, and file-transfer tools such as SFTP.
Kaart 52
Küsimus
DNS — registered port and required general-purpose transports?
Vastus
Port 53 over UDP and TCP. Most ordinary queries start with UDP, while TCP is required for full implementations and used for zone transfers and other larger exchanges.
Kaart 53
Küsimus
25/TCP — which email function?
Vastus
SMTP mail relay and delivery between servers. End-user clients normally submit new mail on TCP 587 or TCP 465 instead.
Kaart 54
Küsimus
80/TCP — which conventional web service?
Vastus
HTTP without TLS. It is the conventional port for HTTP/1.1 and HTTP/2, although servers can listen elsewhere.
Kaart 55
Küsimus
DHCPv4 server endpoint — port and transport?
Vastus
UDP 67. DHCPv4 clients direct server-bound messages to that port.
Kaart 56
Küsimus
FTP control — server port and transport?
Vastus
TCP 21. Commands and replies use the persistent control connection; data travels on a separate connection.
Kaart 57
Küsimus
161/UDP — which network-management traffic?
Vastus
SNMP requests and responses. Managed agents commonly listen on UDP 161 for manager queries.
Kaart 58
Küsimus
Microsoft SQL Server default instance — default port and transport?
Vastus
TCP 1433. Named instances may use dynamic or custom ports, with SQL Server Browser commonly using UDP 1434 for discovery.
Kaart 59
Küsimus
Telnet — conventional port and transport?
Vastus
TCP 23. Telnet carries terminal traffic in plaintext, so SSH is the usual secure replacement.
Kaart 60
Küsimus
123/UDP — which time service?
Vastus
NTP. Network Time Protocol commonly synchronizes clocks over UDP 123.
Kaart 61
Küsimus
110/TCP — which mail-access protocol?
Vastus
POP3. It downloads or retrieves mail from a server; implicit TLS uses TCP 995.
Kaart 62
Küsimus
HTTPS — common port and transports?
Vastus
Port 443: TCP for HTTP/1.1 and HTTP/2 over TLS, and UDP for HTTP/3 over QUIC.
Kaart 63
Küsimus
68/UDP — which DHCPv4 endpoint?
Vastus
The DHCPv4 client endpoint. Servers direct client-bound DHCP messages to UDP 68.
Kaart 64
Küsimus
TFTP — initial request port and transport?
Vastus
UDP 69. Only the initial request targets 69; the server chooses another UDP transfer identifier for the data exchange.
Kaart 65
Küsimus
SNMP traps and other notifications — common receiver port and transport?
Vastus
UDP 162. SNMP notification receivers commonly listen there.
Kaart 66
Küsimus
3306/TCP — which database protocol?
Vastus
The classic MySQL protocol. TCP 3306 is its default client-server port and is configurable.
Kaart 67
Küsimus
RDP — standard port and transports?
Vastus
TCP and UDP 3389. Microsoft Remote Desktop uses them by default, though administrators can change the listening port.
Kaart 68
Küsimus
514/UDP — which logging protocol?
Vastus
Syslog over UDP. It is a conventional lightweight transport without delivery guarantees; secure syslog commonly uses another transport and port.
Kaart 69
Küsimus
143/TCP — which mail-access protocol?
Vastus
IMAP. It manages mail on the server; implicit TLS uses TCP 993.
Kaart 70
Küsimus
Direct-hosted SMB — common server port and transport?
Vastus
TCP 445. It carries SMB directly over TCP without the legacy NetBIOS Session Service on TCP 139.
Kaart 71
Küsimus
Kerberos KDC traffic — port and transports?
Vastus
UDP and TCP 88. Conforming clients and Key Distribution Centers support both, with TCP available for larger exchanges.
Kaart 72
Küsimus
20/TCP — which FTP role?
Vastus
The server side of FTP's default active-mode data connection. Passive mode negotiates a different server port.
Kaart 73
Küsimus
179/TCP — which routing protocol?
Vastus
BGP. Border Gateway Protocol peers use a TCP session to exchange routing information.
Kaart 74
Küsimus
PostgreSQL — customary default port and transport?
Vastus
TCP 5432. PostgreSQL servers normally use it unless configured or compiled with another default.
Kaart 75
Küsimus
500/UDP — which IPsec setup protocol?
Vastus
IKE, the Internet Key Exchange protocol. It negotiates IPsec security associations and commonly moves to UDP 4500 when NAT traversal is used.
Kaart 76
Küsimus
137/UDP — which NetBIOS service?
Vastus
NetBIOS Name Service. It handles name registration and lookup in legacy NetBIOS over TCP/IP environments.
Kaart 77
Küsimus
SMTP message submission — normal port and transport?
Vastus
TCP 587. It separates authenticated client submission from server-to-server SMTP relay on TCP 25; STARTTLS is commonly used.
Kaart 78
Küsimus
LDAP — conventional connection-oriented port and transport?
Vastus
TCP 389. Connectionless LDAP can use UDP 389, and implicit-TLS LDAP commonly uses TCP 636.
Kaart 79
Küsimus
1701/UDP — which tunneling protocol?
Vastus
L2TP. It tunnels Layer 2 traffic but needs a separate security layer such as IPsec when confidentiality is required.
Kaart 80
Küsimus
NetBIOS Datagram Service — common port and transport?
Vastus
UDP 138. It provides connectionless NetBIOS datagram delivery.
Kaart 81
Küsimus
993/TCP — which mail-access service?
Vastus
IMAPS. It begins IMAP with implicit TLS for encrypted access to mail stored on a server.
Kaart 82
Küsimus
LDAPS — commonly used implicit-TLS port and transport?
Vastus
TCP 636. LDAP can instead use TCP 389 and negotiate TLS with StartTLS.
Kaart 83
Küsimus
PPTP control — port and transport?
Vastus
TCP 1723. The control channel uses that port; PPP payloads travel through GRE, which is IP protocol 47 rather than port 47.
Kaart 84
Küsimus
139/TCP — which NetBIOS service?
Vastus
NetBIOS Session Service. It historically carried SMB sessions; direct-hosted SMB commonly uses TCP 445 instead.
Kaart 85
Küsimus
POP3S — default port and transport?
Vastus
TCP 995. It uses implicit TLS for encrypted POP3 mail retrieval.
Kaart 86
Küsimus
1812/UDP — which AAA service?
Vastus
RADIUS authentication and authorization. RADIUS accounting normally uses UDP 1813.
Kaart 87
Küsimus
4500/UDP — which IPsec function?
Vastus
IPsec NAT Traversal. It carries IKE and UDP-encapsulated ESP across network address translation.
Kaart 88
Küsimus
SIP signaling without implicit TLS — common port and transports?
Vastus
UDP or TCP 5060. SIP over TLS conventionally uses TCP 5061, and media streams use separately negotiated ports.
88 kaarti
Common Network Port Numbers Flashcards: Protocols, TCP/UDP & Uses
Nibomo avaneb, et saaksid õppimist alustada.