Chargaff’s Rule Practice: DNA Base Percentages and Counts

A DNA sample contains 28% adenine. If that percentage counts both strands of a fully paired DNA molecule, thymine is also 28%. If it describes just one strand, you can't find that strand's thymine percentage from adenine alone. Before calculating, identify which bases went into the total.

This Chargaff's rule practice uses an idealized, fully paired DNA model containing only A, T, G, and C. Every A pairs with T, and every G pairs with C. Treat the percentages in the exercises as exact.

An outfitter places a pair of ochre hiking boots beside a pair of blue boots in wooden cubbies

Write down what the percentage counts

A complete DNA duplex contains two paired strands. Each A–T pair contributes one A and one T; each G–C pair contributes one G and one C. Across the whole molecule, that gives A = T and G = C, the equalities used in these Chargaff's rule calculations. OpenStax explains complementary pairing and the resulting equal amounts.

Each nucleotide carries one base. A base percentage therefore means:

Base percentage = count of that base ÷ total nucleotides counted × 100.

The denominator—the total you divide by—changes when you switch between one strand and the whole molecule.

What you're counting What you can use
All nucleotides in both paired strands A% = T%; G% = C%; all four add to 100%
Nucleotides in one strand only All four add to 100%; A% need not equal T%, and G% need not equal C%
A strand and its full complement, separately A% in one equals T% in the other; G% in one equals C% in the other
Base pairs in a fully paired molecule Each pair contains two nucleotides; 600 bp means 1,200 nucleotides total

The strands are complementary, rather than necessarily identical. OpenStax's DNA structure overview illustrates the paired strands. The one-strand and denominator distinctions above follow from counting each side separately; the examples below work through those deductions.

Start with a whole-molecule percentage

Worked example: adenine is 28% of all nucleotides in a fully paired DNA molecule. Find T, G, and C.

  1. A and T occur in equal amounts, so T = 28%.
  2. A and T together use 28 + 28 = 56% of the total.
  3. G and C share the remaining 100 − 56 = 44% equally.
  4. G = 22% and C = 22%.

Check: 28 + 28 + 22 + 22 = 100. Each base's percentage matches its pairing partner's.

For a whole duplex, if A is x%, then T is x% and each of G and C is (50 − x)%. That's half of the amount left after A and T. In this model, no individual base can exceed 50% of the whole-duplex total: its partner would need the same share.

GC content is G% + C%. Here it's 44%. You can also work backward: a fully paired molecule with 44% GC has G = C = 22%, leaving A = T = 28%.

A single strand needs a separate row

Worked example: one strand has A = 40%, T = 10%, G = 30%, and C = 20%. Find its complement and the whole-duplex percentages.

Every A in the given strand pairs with a T in its partner. Swap A with T and G with C to get the complementary strand's composition:

Base Given strand Complementary strand Both strands together
A 40% 10% 25%
T 10% 40% 25%
G 30% 20% 25%
C 20% 30% 25%

Because the strands are fully paired, they have equal lengths. Their percentages have equal weight, so whole-duplex A is (40 + 10) ÷ 2 = 25%.

Check with 100 nucleotides per strand: the first contains 40 A bases and its partner contains 10. Together that's 50 A out of 200 nucleotides, or 25%. Adding 40% and 10% without dividing by two would give the wrong denominator.

GC content is 30 + 20 = 50% in the given strand and 20 + 30 = 50% in its complement. It is also 50% across the complete duplex. Taking the full complement swaps the individual G and C percentages while keeping their sum unchanged.

Reversing the order in which you read a strand doesn't change its base counts. For questions that also ask for a sequence, use the end-label checks in the DNA reverse complement practice. For transcription problems, the coding vs template strand worksheet helps you identify which strand you're given.

Convert base pairs before counting bases

Worked example: a fully paired DNA molecule is 600 bp long and has 36% GC content. How many A, T, G, and C nucleotides does it contain?

The molecule contains 600 × 2 = 1,200 nucleotides across both strands. G and C each account for 18%; A and T split the remaining 64%, giving 32% each.

Base Percentage of all nucleotides Count in the whole molecule
A 32% 0.32 × 1,200 = 384
T 32% 384
G 18% 0.18 × 1,200 = 216
C 18% 216

Check: 384 + 384 + 216 + 216 = 1,200 nucleotides.

There are 216 G–C pairs. Each contains one of the 216 G nucleotides and one of the 216 C nucleotides, so those pairs contain 432 nucleotides altogether. The remaining 384 pairs are A–T pairs: 216 + 384 = 600 bp.

You can also find the G–C pair count directly: 36% of 600 pairs = 216 pairs. The same GC fraction works because every pair contributes exactly two nucleotides. Keep the units beside the answer: 216 G–C pairs contain 432 G-and-C nucleotides.

Try these eight questions

Use the fully paired A/T/G/C model whenever a question specifies a duplex. For each calculation, label what you're counting: nucleotides in one strand, nucleotides in both strands, or base pairs. These are original exercises.

  1. Adenine makes up 18% of all nucleotides in a DNA duplex. Find T%, G%, and C%.
  2. Guanine makes up 27% of all nucleotides in a DNA duplex. Find A%, T%, C%, and GC content.
  3. A DNA duplex has 46% GC content. Find the percentage of each base and its AT content.
  4. One 200-nucleotide strand contains 80 A, 40 T, 50 G, and 30 C. Give the base counts in its full complement, then the base percentages across both strands together.
  5. A single strand contains 35% A. No other composition data are given. Can you determine T% on that same strand? Which base percentage can you determine in its full complement?
  6. A DNA duplex is 750 bp long, with 40% GC content. Find the whole-molecule nucleotide count, the count of each base, and the number of G–C pairs.
  7. A DNA duplex contains 1,200 nucleotides in total, including 360 A. Find its length in bp, the counts of T, G, and C, and its GC content.
  8. A DNA sample has A = 30%, T = 30%, G = 20%, and C = 20%. Its strand structure isn't given. Do these percentages prove that it is double-stranded?

Check your answers

  1. T = 18%, G = 32%, C = 32%. A and T occupy 36% of all duplex nucleotides, leaving 64% for G and C.
  2. A = 23%, T = 23%, C = 27%; GC = 54%. G and C use 54% of all duplex nucleotides, leaving 46% for A and T.
  3. A = 27%, T = 27%, G = 23%, C = 23%; AT = 54%. Split GC equally between G and C, then split the remaining 54% between A and T. All percentages count both strands.
  4. Complement: A = 40, T = 80, G = 30, C = 50. Whole duplex: A = 30%, T = 30%, G = 20%, C = 20%. Both strands together contain 400 nucleotides: 120 A, 120 T, 80 G, and 80 C. Divide each count by 400, not 200.
  5. Same-strand T% is undetermined. The complement has 35% T. Pairing maps the given strand's A to its partner's T; it doesn't give the original strand's T. For example, A/T/G/C percentages of 35/15/25/25 and 35/25/20/20 both fit the supplied information. They would produce whole-duplex A percentages of 25% and 30%, respectively, so whole-duplex A% is undetermined too.
  6. 1,500 nucleotides: A = 450, T = 450, G = 300, C = 300; 300 G–C pairs. G and C are each 20% of all 1,500 nucleotides, while A and T are each 30%. The 300 G–C pairs contain 600 nucleotides.
  7. 600 bp; T = 360, G = 240, C = 240; GC = 40%. A = T leaves 1,200 − 720 = 480 nucleotides for G and C. GC content is 480 ÷ 1,200 × 100 = 40%.
  8. No. Those proportions are consistent with a fully paired duplex, but don't establish pairing. A single strand could also have those proportions: AAATTTGGCC contains 3 A, 3 T, 2 G, and 2 C. Conversely, unequal A and T in data explicitly taken from one strand don't show that the original molecule lacked a complementary strand. Composition data need a stated sampling context before you can apply the whole-duplex equalities.

Revisit the denominator you missed

When an answer goes wrong, save a short prompt about the decision that caused it. “600 bp: how many nucleotides across both strands?” checks a different step from “36% GC: what percentage is G?” Try each from memory before uncovering the answer, then return after a gap. Regular recall with spaced review helps you retain the steps rather than just recognize a worked solution.

For wider English-language review, the AP Biology flashcards include DNA base pairing among broader course topics. Use that deck for broader recall and the eight questions here for denominator and count practice.

This worksheet was drafted with AI assistance. Its examples and practice questions were created for this article, and the numerical answers were checked by calculation.

Read next