Resistor Color Code Flashcards: 4 Bands, 5 Bands & Tolerance
Practise 42 original resistor color-code prompts: decode and build conventional 4- and 5-band codes, calculate nominal tolerance intervals, and repair common errors.
ഈ ഡെക്കിനെക്കുറിച്ച്
Read the band roles before doing the arithmetic. These 42 resistor color code flashcards use written color names to practise conventional four- and five-band resistor markings.
You’ll retrieve band roles and selected color values, decode codes into nominal resistance and tolerance, and build codes from an explicit band count, nominal value and tolerance. Reverse encoding is a separate card task because it needs recall in the other direction. Short calculations cover ohms, kiloohms and megaohms; nominal tolerance intervals; exact hypothetical boundary checks; and local repairs for wrong roles, zero digits, units and premature rounding.
All ten significant-digit colors and all conventional multipliers, including gold ×0.1 and silver ×0.01, appear across the set. Tolerance questions deliberately cover only brown ±1%, red ±2%, gold ±5% and silver ±10%. Other tolerance colors exist; this is not an exhaustive modern tolerance table. Every code-conversion prompt states the conventional band count and left-to-right order. One uncertainty task leaves direction unknown and asks whether a unique reading is possible.
The sequence introduces band roles and simple decoding before fractional multipliers, reverse encoding and interval work. Later cards mix those skills with error repair and limits of identification. Closely related variants are kept apart; the review scheduler handles long-term spacing. Every card carries the resistor-color-code tag.
You should be comfortable with decimal multiplication and percentages. Interval tasks use exact hypothetical numbers and the inclusive model R × (1 − t) to R × (1 + t), where t is the tolerance percentage divided by 100. They do not teach measurement procedures or include measurement uncertainty. A marked nominal value is not an exact measured value, and tolerance is not a probability distribution or a guarantee under every operating condition.
Text-only prompts make the tested mapping explicit without requiring color discrimination. Visual color identification, automatic reversal of every lookup, leading-zero encodings, special manufacturer schemes, six-band temperature coefficients, component availability and real electrical repair are excluded. Extra permutations were omitted when they added no distinct recall task. This evergreen Electronics deck is not aligned to an examination or curriculum.
Band roles and the tested color facts were checked against Vishay’s resistor color-code chart. SI unit conversions follow the BIPM prefix definitions. Numeric exercises, wording and organization were independently authored. No manufacturer chart artwork, source examples, competitor cards, article exercises or examination questions were copied or adapted.
AI tools assisted with drafting and the original decorative cover. The author manually read every final front and back and checked each applied answer; this does not claim learner testing or measured learning gains. The CC0 dedication covers original wording, examples, organization, metadata and generated cover to the extent applicable rights exist. Facts and cited materials retain their own status. This is independent, unofficial study practice, with no affiliation to or endorsement by Vishay or the other referenced organizations.
ഈ ഡെക്കിലെ കാർഡുകൾ
കാർഡ് 1
ചോദ്യം
In a conventional 4-band resistor code, what does each band mean from left to right?
ഉത്തരം
Two significant digits, multiplier, tolerance.
Join the first two digits into one number, then multiply.
കാർഡ് 2
ചോദ്യം
In a conventional resistor code, what does a black band in a significant-digit position contribute?
ഉത്തരം
The digit 0.
Keep it in the number. A zero digit does not make the whole resistance zero.
കാർഡ് 3
ചോദ്യം
Conventional 4-band code, read left to right: orange–white–brown–gold. Nominal resistance and tolerance?
ഉത്തരം
390 Ω ±5%.
Orange–white gives 39; brown multiplies by 10. The final gold band gives ±5%.
കാർഡ് 4
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does black mean?
ഉത്തരം
×1.
A black multiplier leaves the significant-digit number unchanged.
കാർഡ് 5
ചോദ്യം
In a conventional 5-band resistor code, what does each band mean from left to right?
ഉത്തരം
Three significant digits, multiplier, tolerance.
The third band is another digit; the multiplier moves to the fourth position.
കാർഡ് 6
ചോദ്യം
Conventional 5-band code, read left to right: red–black–blue–black–brown. Nominal resistance and tolerance?
ഉത്തരം
206 Ω ±1%.
The digits are 2, 0, 6; the black multiplier is ×1. Final brown means ±1%.
കാർഡ് 7
ചോദ്യം
In the tolerance position of a conventional resistor code, what does gold mean?
ഉത്തരം
±5%.
This percentage describes a permitted deviation from the nominal resistance in the stated tolerance model.
കാർഡ് 8
ചോദ്യം
Can gold or silver be a significant digit in a conventional 4- or 5-band resistor code?
ഉത്തരം
No. Neither color represents a significant digit.
Gold and silver are used for multipliers or tolerances in this scheme.
കാർഡ് 9
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does gold mean?
ഉത്തരം
×0.1.
Divide the significant-digit number by 10.
കാർഡ് 10
ചോദ്യം
Conventional 5-band code, read left to right: brown–red–white–brown–gold. Nominal resistance and tolerance?
ഉത്തരം
1.29 kΩ ±5%.
The digits give 129; ×10 gives 1290 Ω. Final gold means ±5%.
കാർഡ് 11
ചോദ്യം
In the tolerance position of a conventional resistor code, what does red mean?
ഉത്തരം
±2%.
Read the band by its role: red can mean a digit, a multiplier, or a tolerance.
കാർഡ് 12
ചോദ്യം
Express 0.24 MΩ in kΩ.
ഉത്തരം
240 kΩ.
One megaohm is 1000 kiloohms: 0.24 × 1000 = 240.
കാർഡ് 13
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does silver mean?
ഉത്തരം
×0.01.
Divide the significant-digit number by 100.
കാർഡ് 14
ചോദ്യം
Conventional 4-band code, read left to right: violet–white–gold–silver. Nominal resistance and tolerance?
ഉത്തരം
7.9 Ω ±10%.
The digits give 79; gold multiplies by 0.1. Final silver means ±10%.
കാർഡ് 15
ചോദ്യം
A conventional 5-band resistor ends with a gold band. Does having five bands make its tolerance ±1%?
ഉത്തരം
No. Its final gold band means ±5%.
Band count changes the number of significant digits. It does not replace the tolerance band.
കാർഡ് 16
ചോദ്യം
Conventional 4-band code for 820 Ω ±2%, written left to right?
ഉത്തരം
Gray–red–brown–red.
82 × 10 = 820 Ω. The last red band specifies ±2%.
കാർഡ് 17
ചോദ്യം
In the tolerance position of a conventional resistor code, what does brown mean?
ഉത്തരം
±1%.
A brown tolerance band means one percent, not one ohm.
കാർഡ് 18
ചോദ്യം
Conventional 4-band code, read left to right: yellow–blue–silver–gold. Nominal resistance and tolerance?
ഉത്തരം
0.46 Ω ±5%.
The digits give 46; silver multiplies by 0.01. Final gold means ±5%.
കാർഡ് 19
ചോദ്യം
Conventional 5-band code for 64.2 kΩ ±1%, written left to right?
ഉത്തരം
Blue–yellow–red–red–brown.
642 × 100 = 64,200 Ω. Final brown specifies ±1%.
കാർഡ് 20
ചോദ്യം
For a nominal 1200 Ω resistor with ±5% tolerance, what is the nominal tolerance interval?
ഉത്തരം
1140–1260 Ω, including both endpoints.
5% of 1200 Ω is 60 Ω; subtract and add 60 Ω.
കാർഡ് 21
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does violet mean?
ഉത്തരം
×10,000,000.
That is ten million, or 10⁷.
കാർഡ് 22
ചോദ്യം
Conventional 4-band code, read left to right: blue–brown–yellow–brown. Nominal resistance and tolerance?
ഉത്തരം
610 kΩ ±1%.
61 × 10,000 = 610,000 Ω. Final brown means ±1%.
കാർഡ് 23
ചോദ്യം
Conventional 4-band code for 9.1 Ω ±10%, written left to right?
ഉത്തരം
White–brown–gold–silver.
91 × 0.1 = 9.1 Ω. Final silver specifies ±10%.
കാർഡ് 24
ചോദ്യം
For a nominal 75 Ω resistor with ±2% tolerance, what is the nominal tolerance interval?
ഉത്തരം
73.5–76.5 Ω, including both endpoints.
2% of 75 Ω is 1.5 Ω.
കാർഡ് 25
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does white mean?
ഉത്തരം
×1,000,000,000.
That is one billion, or 10⁹.
കാർഡ് 26
ചോദ്യം
Conventional 5-band code, read left to right: green–orange–black–green–red. Nominal resistance and tolerance?
ഉത്തരം
53 MΩ ±2%.
530 × 100,000 = 53,000,000 Ω. Final red means ±2%.
കാർഡ് 27
ചോദ്യം
Conventional 5-band code for 3.16 Ω ±1%, written left to right?
ഉത്തരം
Orange–brown–blue–silver–brown.
316 × 0.01 = 3.16 Ω. Final brown specifies ±1%.
കാർഡ് 28
ചോദ്യം
For a nominal 0.82 Ω resistor with ±5% tolerance, what is the nominal tolerance interval without rounding?
ഉത്തരം
0.779–0.861 Ω, including both endpoints.
The deviation is 0.82 × 0.05 = 0.041 Ω.
കാർഡ് 29
ചോദ്യം
In the multiplier position of a conventional resistor code, what factor does gray (grey) mean?
ഉത്തരം
×100,000,000.
That is one hundred million, or 10⁸.
കാർഡ് 30
ചോദ്യം
Conventional 4-band code, read left to right: brown–gray–blue–gold. Nominal resistance and tolerance?
ഉത്തരം
18 MΩ ±5%.
18 × 1,000,000 = 18,000,000 Ω. Final gold means ±5%.
കാർഡ് 31
ചോദ്യം
In the nominal interval model, a resistor is 250 Ω ±10%. Is an exact hypothetical value of 275 Ω inside, on a boundary, or outside?
ഉത്തരം
On the upper boundary, so it is included.
The interval is 225–275 Ω. This exact-number exercise ignores measurement uncertainty.
കാർഡ് 32
ചോദ്യം
Conventional 4-band code for 36 MΩ ±5%, written left to right?
ഉത്തരം
Orange–blue–blue–gold.
36 × 1,000,000 = 36 MΩ. Final gold specifies ±5%.
കാർഡ് 33
ചോദ്യം
For a nominal 2.4 kΩ resistor with ±1% tolerance, what is the nominal tolerance interval in kΩ?
ഉത്തരം
2.376–2.424 kΩ, including both endpoints.
The deviation is 0.024 kΩ. Keep the same unit throughout.
കാർഡ് 34
ചോദ്യം
Conventional 4-band code, read left to right: blue–black–orange–gold. A learner gets 0 Ω because black is 0. Correct the nominal value.
ഉത്തരം
60 kΩ.
Blue–black forms 60, then orange multiplies by 1000. The zero is a digit inside 60.
കാർഡ് 35
ചോദ്യം
In the nominal interval model, a resistor is 2000 Ω ±2%. Is an exact hypothetical value of 2041 Ω inside or outside?
ഉത്തരം
Outside.
The inclusive interval is 1960–2040 Ω. The hypothetical value is 1 Ω above the upper limit; measurement uncertainty is outside this exercise.
കാർഡ് 36
ചോദ്യം
Conventional 5-band code for 91.3 MΩ ±2%, written left to right?
ഉത്തരം
White–brown–orange–green–red.
913 × 100,000 = 91.3 MΩ. Final red specifies ±2%.
കാർഡ് 37
ചോദ്യം
Conventional 4-band code, read left to right: green–red–gold–brown. A learner treats gold as the tolerance. Give the correct nominal resistance and tolerance.
ഉത്തരം
5.2 Ω ±1%.
Gold is the third band, so it multiplies 52 by 0.1. Final brown supplies ±1%.
കാർഡ് 38
ചോദ്യം
A nominal 6.8 Ω resistor has ±1% tolerance. A learner rounds the deviation to 0.07 Ω before finding the limits. What is the unrounded interval?
ഉത്തരം
6.732–6.868 Ω.
Use the exact deviation, 6.8 × 0.01 = 0.068 Ω, before subtracting and adding.
കാർഡ് 39
ചോദ്യം
A conventional 5-band code is listed from one end: brown–green–black–brown–red. Reading direction and physical spacing are unknown. Is one nominal resistance uniquely determined?
ഉത്തരം
No. Both directions give valid readings.
As listed: 150 × 10 = 1500 Ω ±2%.
Reversed: red–brown–black–green–brown gives 210 × 100,000 = 21 MΩ ±1%. More orientation evidence is needed.
കാർഡ് 40
ചോദ്യം
A calculation gives 72,000 Ω. A learner writes 72 MΩ. Correct the unit conversion.
ഉത്തരം
72 kΩ, or 0.072 MΩ.
Divide ohms by 1000 for kiloohms, or by 1,000,000 for megaohms.
കാർഡ് 41
ചോദ്യം
Does a ±5% resistor tolerance mean there is a 95% probability that its resistance lies in the nominal interval?
ഉത്തരം
No. Tolerance is not a probability distribution.
It specifies a relative allowed deviation under the applicable specifications. The percentage alone does not give probabilities or cover every operating condition.
കാർഡ് 42
ചോദ്യം
Does seeing five bands on an unfamiliar real component prove that it uses the conventional 5-band resistor code?
ഉത്തരം
No. Confirm the component and marking scheme.
These cards assume conventional resistor markings. Special manufacturer schemes and six-band temperature-coefficient markings are outside this deck.
42 കാർഡുകൾ
Resistor Color Code Flashcards: 4 Bands, 5 Bands & Tolerance
പഠനം തുടങ്ങാൻ Nibomo തുറക്കും.