Special Relativity Flashcards: Reference Frames, Time, and Length
30 English cards for choosing an inertial frame and practicing proper time, length contraction, and simultaneity with original examples.
Tietoja tästä pakasta
Practice the decisions that come before the arithmetic in introductory special relativity. Start with an event and a reference frame. Identify a clock’s rest frame, decide which time readings to compare, and choose two endpoint measurements that give a moving object’s length.
The 30 English cards ask you to distinguish flash emission from light arrival, identify the event pair that gives a proper time, and find the frame that gives a proper length. Retrieve when to multiply or divide by the Lorentz factor, then apply it in short examples. The cards start with coordinates and clocks, then use those ideas for measurements and calculations.
The deck focuses on time and length in inertial frames. It leaves out the full Lorentz transformations, accelerating trajectories, Doppler shifts, relativistic dynamics, and gravity to keep practice centered on the measurement setup.
The prompts, answers, examples, and sequence are original. The physics was checked against OpenStax University Physics Volume 3, sections 5.2–5.4.
Tämän pakan kortit
Kortti 1
Kysymys
What two kinds of coordinates identify an event in an inertial frame?
Vastaus
A position and a time. A camera shutter closing is one event, and the frame gives the coordinates of that closure.
Kortti 2
Kysymys
An instrument is bolted to a pod that coasts past a lab. Which is the instrument’s rest frame?
Vastaus
The pod frame. The instrument stays at a fixed position in that frame.
Kortti 3
Kysymys
A pod recedes from a lamp in vacuum. What speed does the pod measure for light from the lamp?
Vastaus
, the same speed the lab measures for the light.
Kortti 4
Kysymys
A beacon flashes and its light reaches a distant camera. Which event does the camera’s detection timestamp give directly?
Vastaus
The light’s arrival at the camera. The flash is a separate event at the beacon.
Kortti 5
Kysymys
Two events occur beside the same clock at rest in a frame. What interval does that clock record between them?
Vastaus
The proper time, , between the two events.
Kortti 6
Kysymys
In one inertial frame, how can two separated events be timed locally and compared?
Vastaus
Place a clock at each event location. Keep both clocks at rest and synchronized in the chosen frame, then subtract the event readings.
Kortti 7
Kysymys
In which frame is the proper length of a rigid calibration bar measured?
Vastaus
The bar’s rest frame, where both ends stay at fixed positions.
Kortti 8
Kysymys
A probe coasts in a straight line at constant speed relative to an inertial lab. Is the frame attached to the coasting probe inertial?
Vastaus
Yes. Constant velocity relative to an inertial frame gives another inertial frame.
Kortti 9
Kysymys
A detector at rest midway between two stationary lamps receives their vacuum flashes together. When were the flashes emitted in the lamps’ frame?
Vastaus
At the same time. The paths to the detector have equal length and light travels at the same speed along both.
Kortti 10
Kysymys
How do you calculate the Lorentz factor from the relative speed ?
Vastaus
, where is the speed of light in vacuum.
Kortti 11
Kysymys
A rod moves along the lab’s track. Which two lab events give the rod’s length in that frame?
Vastaus
Record the front and rear endpoint positions at the same lab time. Their separation at that time is the lab length.
Kortti 12
Kysymys
Two events happen at different lab stations but both happen beside the same clock on a coasting probe. Which clock gives the proper time?
Vastaus
The probe clock. The events occur at its one fixed probe location.
Kortti 13
Kysymys
A detector at rest in a lab receives a flash at lab time . The light traveled for in the lab frame. When was the flash emitted in that frame?
Vastaus
At . Subtract travel time from arrival time in the same frame.
Kortti 14
Kysymys
What is the Lorentz factor at relative speed ?
Vastaus
. The square root in the denominator is .
Kortti 15
Kysymys
A lab timed two flashes when they were emitted. Which events should a passing pod use to compare the time interval in its own frame?
Vastaus
The same two emissions. The arrival of either flash at a detector is a separate event.
Kortti 16
Kysymys
A moving rod’s front position is recorded first and its rear position one lab second later. Does the difference between the recorded positions give the lab length?
Vastaus
No. Use endpoint positions at one lab time. The rear has moved during that second.
Kortti 17
Kysymys
A clock coasts past an inertial lab and records proper time between two ticks. What interval does the lab assign to those same ticks?
Vastaus
. The lab uses synchronized clocks to time the ticks at different positions.
Kortti 18
Kysymys
Two flashes at different positions along a test range are simultaneous in the range frame. A pod coasts along the line joining them. Are the emissions simultaneous in the pod frame?
Vastaus
No, for a nonzero relative speed along that line. The two frames assign different time differences to the same emissions.
Kortti 19
Kysymys
If the relative velocity reverses direction without changing speed, what happens to the Lorentz factor?
Vastaus
It stays the same. The factor depends on .
Kortti 20
Kysymys
A bar coasts past an inertial lab with its length perpendicular to its velocity. How does the length measured in the lab compare with the bar’s rest length?
Vastaus
They are equal. The lab records both ends at the same lab time, and their separation is entirely transverse to the motion.
Kortti 21
Kysymys
A pod coasting at relative to the lab records between two ticks of its own clock. How much lab time separates those ticks?
Vastaus
. The lab interval is .
Kortti 22
Kysymys
How do you find the measured length of an object moving along its length at constant speed, given its proper length ?
Vastaus
. Measure both ends at one time in the frame where the object moves.
Kortti 23
Kysymys
Two lamps and a detector are at rest in the same frame. Their flashes travel directly through vacuum to the detector and arrive together. If one lamp is farther away, which lamp emitted first in that frame?
Vastaus
The farther lamp. Both flashes traveled at the same speed, so the longer path took more time.
Kortti 24
Kysymys
A boom’s endpoints are measured at the same lab time while it moves lengthwise. Does the boom frame assign the same time to those two measurements?
Vastaus
No. Simultaneity is frame-dependent for these two events because they occur at different points along the direction of relative motion.
Kortti 25
Kysymys
Two ticks of a clock coasting at relative to the lab are apart in lab time. How much time elapsed on the moving clock?
Vastaus
. Its proper time is .
Kortti 26
Kysymys
A bar in its rest frame moves lengthwise at in the lab. What length does the lab measure?
Vastaus
. Divide by .
Kortti 27
Kysymys
Two inertial crews coast past one another and each uses clocks synchronized in its own frame. How can each assign a slower rate to the other crew’s clock?
Vastaus
They compare different pairs of ticks. Each times two ticks of the other crew’s clock with separated clocks synchronized in its own frame.
Kortti 28
Kysymys
The nose of a coasting probe passes two checkpoints at rest in an inertial lab. Which frame gives the proper time between those crossings?
Vastaus
The probe frame. Both crossings happen at its nose, where one clock on the probe can time them.
Kortti 29
Kysymys
Two light pulses reach the same detector at the same instant. Do all inertial frames agree that the pulses arrive together?
Vastaus
Yes. They arrive at one place and time, so their arrivals coincide in a single event. Each frame still assigns its own coordinates to that event.
Kortti 30
Kysymys
A bar moves lengthwise at relative to the lab, which measures its length as . What is the bar’s proper length?
Vastaus
. Multiply the lab length by .
30 korttia
Special Relativity Flashcards: Reference Frames, Time, and Length
Nibomo avautuu, jotta voit aloittaa opiskelun.