Special Relativity Flashcards: Reference Frames, Time, and Length

30 English cards for choosing an inertial frame and practicing proper time, length contraction, and simultaneity with original examples.

Despre acest pachet

Practice the decisions that come before the arithmetic in introductory special relativity. Start with an event and a reference frame. Identify a clock’s rest frame, decide which time readings to compare, and choose two endpoint measurements that give a moving object’s length.

The 30 English cards ask you to distinguish flash emission from light arrival, identify the event pair that gives a proper time, and find the frame that gives a proper length. Retrieve when to multiply or divide by the Lorentz factor, then apply it in short examples. The cards start with coordinates and clocks, then use those ideas for measurements and calculations.

The deck focuses on time and length in inertial frames. It leaves out the full Lorentz transformations, accelerating trajectories, Doppler shifts, relativistic dynamics, and gravity to keep practice centered on the measurement setup.

The prompts, answers, examples, and sequence are original. The physics was checked against OpenStax University Physics Volume 3, sections 5.2–5.4.

Fișele din acest pachet

  1. Fișa 1

    Întrebare

    What two kinds of coordinates identify an event in an inertial frame?

    Răspuns

    A position and a time. A camera shutter closing is one event, and the frame gives the coordinates of that closure.

  2. Fișa 2

    Întrebare

    An instrument is bolted to a pod that coasts past a lab. Which is the instrument’s rest frame?

    Răspuns

    The pod frame. The instrument stays at a fixed position in that frame.

  3. Fișa 3

    Întrebare

    A pod recedes from a lamp in vacuum. What speed does the pod measure for light from the lamp?

    Răspuns

    cc, the same speed the lab measures for the light.

  4. Fișa 4

    Întrebare

    A beacon flashes and its light reaches a distant camera. Which event does the camera’s detection timestamp give directly?

    Răspuns

    The light’s arrival at the camera. The flash is a separate event at the beacon.

  5. Fișa 5

    Întrebare

    Two events occur beside the same clock at rest in a frame. What interval does that clock record between them?

    Răspuns

    The proper time, Δτ\Delta\tau, between the two events.

  6. Fișa 6

    Întrebare

    In one inertial frame, how can two separated events be timed locally and compared?

    Răspuns

    Place a clock at each event location. Keep both clocks at rest and synchronized in the chosen frame, then subtract the event readings.

  7. Fișa 7

    Întrebare

    In which frame is the proper length of a rigid calibration bar measured?

    Răspuns

    The bar’s rest frame, where both ends stay at fixed positions.

  8. Fișa 8

    Întrebare

    A probe coasts in a straight line at constant speed relative to an inertial lab. Is the frame attached to the coasting probe inertial?

    Răspuns

    Yes. Constant velocity relative to an inertial frame gives another inertial frame.

  9. Fișa 9

    Întrebare

    A detector at rest midway between two stationary lamps receives their vacuum flashes together. When were the flashes emitted in the lamps’ frame?

    Răspuns

    At the same time. The paths to the detector have equal length and light travels at the same speed along both.

  10. Fișa 10

    Întrebare

    How do you calculate the Lorentz factor γ\gamma from the relative speed vv?

    Răspuns

    γ=1/1−(v/c)2\gamma=1/\sqrt{1-(v/c)^2}, where cc is the speed of light in vacuum.

  11. Fișa 11

    Întrebare

    A rod moves along the lab’s track. Which two lab events give the rod’s length in that frame?

    Răspuns

    Record the front and rear endpoint positions at the same lab time. Their separation at that time is the lab length.

  12. Fișa 12

    Întrebare

    Two events happen at different lab stations but both happen beside the same clock on a coasting probe. Which clock gives the proper time?

    Răspuns

    The probe clock. The events occur at its one fixed probe location.

  13. Fișa 13

    Întrebare

    A detector at rest in a lab receives a flash at lab time 6 μs6\,\mu\mathrm{s}. The light traveled for 2 μs2\,\mu\mathrm{s} in the lab frame. When was the flash emitted in that frame?

    Răspuns

    At 4 μs4\,\mu\mathrm{s}. Subtract travel time from arrival time in the same frame.

  14. Fișa 14

    Întrebare

    What is the Lorentz factor at relative speed 0.60c0.60c?

    Răspuns

    1.251.25. The square root in the denominator is 1−0.602=0.80\sqrt{1-0.60^2}=0.80.

  15. Fișa 15

    Întrebare

    A lab timed two flashes when they were emitted. Which events should a passing pod use to compare the time interval in its own frame?

    Răspuns

    The same two emissions. The arrival of either flash at a detector is a separate event.

  16. Fișa 16

    Întrebare

    A moving rod’s front position is recorded first and its rear position one lab second later. Does the difference between the recorded positions give the lab length?

    Răspuns

    No. Use endpoint positions at one lab time. The rear has moved during that second.

  17. Fișa 17

    Întrebare

    A clock coasts past an inertial lab and records proper time Δτ\Delta\tau between two ticks. What interval Δt\Delta t does the lab assign to those same ticks?

    Răspuns

    Δt=γΔτ\Delta t=\gamma\Delta\tau. The lab uses synchronized clocks to time the ticks at different positions.

  18. Fișa 18

    Întrebare

    Two flashes at different positions along a test range are simultaneous in the range frame. A pod coasts along the line joining them. Are the emissions simultaneous in the pod frame?

    Răspuns

    No, for a nonzero relative speed along that line. The two frames assign different time differences to the same emissions.

  19. Fișa 19

    Întrebare

    If the relative velocity reverses direction without changing speed, what happens to the Lorentz factor?

    Răspuns

    It stays the same. The factor depends on (v/c)2(v/c)^2.

  20. Fișa 20

    Întrebare

    A bar coasts past an inertial lab with its length perpendicular to its velocity. How does the length measured in the lab compare with the bar’s rest length?

    Răspuns

    They are equal. The lab records both ends at the same lab time, and their separation is entirely transverse to the motion.

  21. Fișa 21

    Întrebare

    A pod coasting at 0.80c0.80c relative to the lab records 9 s9\,\mathrm{s} between two ticks of its own clock. How much lab time separates those ticks?

    Răspuns

    15 s15\,\mathrm{s}. The lab interval is (5/3)×9 s(5/3)\times9\,\mathrm{s}.

  22. Fișa 22

    Întrebare

    How do you find the measured length LL of an object moving along its length at constant speed, given its proper length L0L_0?

    Răspuns

    L=L0/γL=L_0/\gamma. Measure both ends at one time in the frame where the object moves.

  23. Fișa 23

    Întrebare

    Two lamps and a detector are at rest in the same frame. Their flashes travel directly through vacuum to the detector and arrive together. If one lamp is farther away, which lamp emitted first in that frame?

    Răspuns

    The farther lamp. Both flashes traveled at the same speed, so the longer path took more time.

  24. Fișa 24

    Întrebare

    A boom’s endpoints are measured at the same lab time while it moves lengthwise. Does the boom frame assign the same time to those two measurements?

    Răspuns

    No. Simultaneity is frame-dependent for these two events because they occur at different points along the direction of relative motion.

  25. Fișa 25

    Întrebare

    Two ticks of a clock coasting at 0.60c0.60c relative to the lab are 15 s15\,\mathrm{s} apart in lab time. How much time elapsed on the moving clock?

    Răspuns

    12 s12\,\mathrm{s}. Its proper time is 15 s/1.2515\,\mathrm{s}/1.25.

  26. Fișa 26

    Întrebare

    A 75 m75\,\mathrm{m} bar in its rest frame moves lengthwise at 0.80c0.80c in the lab. What length does the lab measure?

    Răspuns

    45 m45\,\mathrm{m}. Divide 75 m75\,\mathrm{m} by 5/35/3.

  27. Fișa 27

    Întrebare

    Two inertial crews coast past one another and each uses clocks synchronized in its own frame. How can each assign a slower rate to the other crew’s clock?

    Răspuns

    They compare different pairs of ticks. Each times two ticks of the other crew’s clock with separated clocks synchronized in its own frame.

  28. Fișa 28

    Întrebare

    The nose of a coasting probe passes two checkpoints at rest in an inertial lab. Which frame gives the proper time between those crossings?

    Răspuns

    The probe frame. Both crossings happen at its nose, where one clock on the probe can time them.

  29. Fișa 29

    Întrebare

    Two light pulses reach the same detector at the same instant. Do all inertial frames agree that the pulses arrive together?

    Răspuns

    Yes. They arrive at one place and time, so their arrivals coincide in a single event. Each frame still assigns its own coordinates to that event.

  30. Fișa 30

    Întrebare

    A bar moves lengthwise at 0.60c0.60c relative to the lab, which measures its length as 52 m52\,\mathrm{m}. What is the bar’s proper length?

    Răspuns

    65 m65\,\mathrm{m}. Multiply the lab length by 1.251.25.

A blue two-car train beside a platform with two glowing lamps.

30 de fișe

Special Relativity Flashcards: Reference Frames, Time, and Length

Studiază gratuit acest pachet

Nibomo se deschide ca să poți începe să studiezi.

Pachete similare