Special Relativity Flashcards: Reference Frames, Time, and Length

30 English cards for choosing an inertial frame and practicing proper time, length contraction, and simultaneity with original examples.

Über dieses Lernkartenset

Practice the decisions that come before the arithmetic in introductory special relativity. Start with an event and a reference frame. Identify a clock’s rest frame, decide which time readings to compare, and choose two endpoint measurements that give a moving object’s length.

The 30 English cards ask you to distinguish flash emission from light arrival, identify the event pair that gives a proper time, and find the frame that gives a proper length. Retrieve when to multiply or divide by the Lorentz factor, then apply it in short examples. The cards start with coordinates and clocks, then use those ideas for measurements and calculations.

The deck focuses on time and length in inertial frames. It leaves out the full Lorentz transformations, accelerating trajectories, Doppler shifts, relativistic dynamics, and gravity to keep practice centered on the measurement setup.

The prompts, answers, examples, and sequence are original. The physics was checked against OpenStax University Physics Volume 3, sections 5.2–5.4.

Karten in diesem Lernkartenset

  1. Karte 1

    Frage

    What two kinds of coordinates identify an event in an inertial frame?

    Antwort

    A position and a time. A camera shutter closing is one event, and the frame gives the coordinates of that closure.

  2. Karte 2

    Frage

    An instrument is bolted to a pod that coasts past a lab. Which is the instrument’s rest frame?

    Antwort

    The pod frame. The instrument stays at a fixed position in that frame.

  3. Karte 3

    Frage

    A pod recedes from a lamp in vacuum. What speed does the pod measure for light from the lamp?

    Antwort

    cc, the same speed the lab measures for the light.

  4. Karte 4

    Frage

    A beacon flashes and its light reaches a distant camera. Which event does the camera’s detection timestamp give directly?

    Antwort

    The light’s arrival at the camera. The flash is a separate event at the beacon.

  5. Karte 5

    Frage

    Two events occur beside the same clock at rest in a frame. What interval does that clock record between them?

    Antwort

    The proper time, Δτ\Delta\tau, between the two events.

  6. Karte 6

    Frage

    In one inertial frame, how can two separated events be timed locally and compared?

    Antwort

    Place a clock at each event location. Keep both clocks at rest and synchronized in the chosen frame, then subtract the event readings.

  7. Karte 7

    Frage

    In which frame is the proper length of a rigid calibration bar measured?

    Antwort

    The bar’s rest frame, where both ends stay at fixed positions.

  8. Karte 8

    Frage

    A probe coasts in a straight line at constant speed relative to an inertial lab. Is the frame attached to the coasting probe inertial?

    Antwort

    Yes. Constant velocity relative to an inertial frame gives another inertial frame.

  9. Karte 9

    Frage

    A detector at rest midway between two stationary lamps receives their vacuum flashes together. When were the flashes emitted in the lamps’ frame?

    Antwort

    At the same time. The paths to the detector have equal length and light travels at the same speed along both.

  10. Karte 10

    Frage

    How do you calculate the Lorentz factor γ\gamma from the relative speed vv?

    Antwort

    γ=1/1−(v/c)2\gamma=1/\sqrt{1-(v/c)^2}, where cc is the speed of light in vacuum.

  11. Karte 11

    Frage

    A rod moves along the lab’s track. Which two lab events give the rod’s length in that frame?

    Antwort

    Record the front and rear endpoint positions at the same lab time. Their separation at that time is the lab length.

  12. Karte 12

    Frage

    Two events happen at different lab stations but both happen beside the same clock on a coasting probe. Which clock gives the proper time?

    Antwort

    The probe clock. The events occur at its one fixed probe location.

  13. Karte 13

    Frage

    A detector at rest in a lab receives a flash at lab time 6 μs6\,\mu\mathrm{s}. The light traveled for 2 μs2\,\mu\mathrm{s} in the lab frame. When was the flash emitted in that frame?

    Antwort

    At 4 μs4\,\mu\mathrm{s}. Subtract travel time from arrival time in the same frame.

  14. Karte 14

    Frage

    What is the Lorentz factor at relative speed 0.60c0.60c?

    Antwort

    1.251.25. The square root in the denominator is 1−0.602=0.80\sqrt{1-0.60^2}=0.80.

  15. Karte 15

    Frage

    A lab timed two flashes when they were emitted. Which events should a passing pod use to compare the time interval in its own frame?

    Antwort

    The same two emissions. The arrival of either flash at a detector is a separate event.

  16. Karte 16

    Frage

    A moving rod’s front position is recorded first and its rear position one lab second later. Does the difference between the recorded positions give the lab length?

    Antwort

    No. Use endpoint positions at one lab time. The rear has moved during that second.

  17. Karte 17

    Frage

    A clock coasts past an inertial lab and records proper time Δτ\Delta\tau between two ticks. What interval Δt\Delta t does the lab assign to those same ticks?

    Antwort

    Δt=γΔτ\Delta t=\gamma\Delta\tau. The lab uses synchronized clocks to time the ticks at different positions.

  18. Karte 18

    Frage

    Two flashes at different positions along a test range are simultaneous in the range frame. A pod coasts along the line joining them. Are the emissions simultaneous in the pod frame?

    Antwort

    No, for a nonzero relative speed along that line. The two frames assign different time differences to the same emissions.

  19. Karte 19

    Frage

    If the relative velocity reverses direction without changing speed, what happens to the Lorentz factor?

    Antwort

    It stays the same. The factor depends on (v/c)2(v/c)^2.

  20. Karte 20

    Frage

    A bar coasts past an inertial lab with its length perpendicular to its velocity. How does the length measured in the lab compare with the bar’s rest length?

    Antwort

    They are equal. The lab records both ends at the same lab time, and their separation is entirely transverse to the motion.

  21. Karte 21

    Frage

    A pod coasting at 0.80c0.80c relative to the lab records 9 s9\,\mathrm{s} between two ticks of its own clock. How much lab time separates those ticks?

    Antwort

    15 s15\,\mathrm{s}. The lab interval is (5/3)×9 s(5/3)\times9\,\mathrm{s}.

  22. Karte 22

    Frage

    How do you find the measured length LL of an object moving along its length at constant speed, given its proper length L0L_0?

    Antwort

    L=L0/γL=L_0/\gamma. Measure both ends at one time in the frame where the object moves.

  23. Karte 23

    Frage

    Two lamps and a detector are at rest in the same frame. Their flashes travel directly through vacuum to the detector and arrive together. If one lamp is farther away, which lamp emitted first in that frame?

    Antwort

    The farther lamp. Both flashes traveled at the same speed, so the longer path took more time.

  24. Karte 24

    Frage

    A boom’s endpoints are measured at the same lab time while it moves lengthwise. Does the boom frame assign the same time to those two measurements?

    Antwort

    No. Simultaneity is frame-dependent for these two events because they occur at different points along the direction of relative motion.

  25. Karte 25

    Frage

    Two ticks of a clock coasting at 0.60c0.60c relative to the lab are 15 s15\,\mathrm{s} apart in lab time. How much time elapsed on the moving clock?

    Antwort

    12 s12\,\mathrm{s}. Its proper time is 15 s/1.2515\,\mathrm{s}/1.25.

  26. Karte 26

    Frage

    A 75 m75\,\mathrm{m} bar in its rest frame moves lengthwise at 0.80c0.80c in the lab. What length does the lab measure?

    Antwort

    45 m45\,\mathrm{m}. Divide 75 m75\,\mathrm{m} by 5/35/3.

  27. Karte 27

    Frage

    Two inertial crews coast past one another and each uses clocks synchronized in its own frame. How can each assign a slower rate to the other crew’s clock?

    Antwort

    They compare different pairs of ticks. Each times two ticks of the other crew’s clock with separated clocks synchronized in its own frame.

  28. Karte 28

    Frage

    The nose of a coasting probe passes two checkpoints at rest in an inertial lab. Which frame gives the proper time between those crossings?

    Antwort

    The probe frame. Both crossings happen at its nose, where one clock on the probe can time them.

  29. Karte 29

    Frage

    Two light pulses reach the same detector at the same instant. Do all inertial frames agree that the pulses arrive together?

    Antwort

    Yes. They arrive at one place and time, so their arrivals coincide in a single event. Each frame still assigns its own coordinates to that event.

  30. Karte 30

    Frage

    A bar moves lengthwise at 0.60c0.60c relative to the lab, which measures its length as 52 m52\,\mathrm{m}. What is the bar’s proper length?

    Antwort

    65 m65\,\mathrm{m}. Multiply the lab length by 1.251.25.

A blue two-car train beside a platform with two glowing lamps.

30 Karten

Special Relativity Flashcards: Reference Frames, Time, and Length

Mit diesem Lernkartenset kostenlos lernen

Nibomo wird geöffnet, damit du mit dem Lernen beginnen kannst.

Ähnliche Lernkartensets