Ksp and Molar Solubility Flashcards

Calculate Ksp and molar solubility in both directions, set up common-ion problems, and check approximations.

Kuhusu kundi hili la kadi

Practice Ksp and molar solubility with original, short problems for introductory chemistry. The examples use hypothetical salts and values in a dilute-solution model at fixed temperature, with dissolution as the only equilibrium.

Start by balancing a dissolution equation, turning coefficients into ion concentration changes and Ksp exponents, and converting between molar solubility and a single ion concentration. Then calculate Ksp from molar solubility and work back from Ksp to molar solubility for 1:1, 1:2, and 2:3 ion ratios. Two cards also practice using given equilibrium ion concentrations to find Ksp and converting mass per liter to moles per liter.

Finish with common ions. Work out the starting ion concentration, place it in the equilibrium expression, and solve for molar solubility with and without the small-change approximation. Check the size of the omitted change against a stated tolerance or substitute the estimate into the full product to check its residual.

These cards isolate individual setup steps and leave the full initial–change–equilibrium table for a worksheet, where you can practice all the steps together. Precipitation after mixing is a separate calculation that starts with post-mix concentrations and uses Qsp to decide whether precipitation is favored. The examples here focus on saturated solutions.

The prompts, worked answers, problem selection, and order are original. The cover is an AI-generated illustration for Nibomo. The original material is available under CC0 1.0 to the extent rights apply.

Kadi za kundi hili la kadi

  1. Kadi namba 1

    Swali

    What does molar solubility ss measure for an ionic solid, and what unit does it use?

    Jibu

    The moles of solid that dissolve per liter of saturated solution at a given temperature, in mol/L\mathrm{mol/L}. Count moles of formula units.

  2. Kadi namba 2

    Swali

    Write the balanced dissolution equation for solid M2X3\mathrm{M_2X_3}, which releases M3+\mathrm{M^{3+}} and X2−\mathrm{X^{2-}}.

    Jibu

    M2X3(s)⇌2M3+(aq)+3X2−(aq)\mathrm{M_2X_3(s)} \rightleftharpoons 2\mathrm{M^{3+}(aq)} + 3\mathrm{X^{2-}(aq)}

    Two cations and three anions balance both the atoms and the charge.

  3. Kadi namba 3

    Swali

    A hypothetical M2X\mathrm{M_2X} salt has molar solubility 3.2×10−4 mol/L3.2\times10^{-4}\,\mathrm{mol/L} in pure water. What is [M][\mathrm{M}]?

    Jibu

    6.4×10−4 mol/L6.4\times10^{-4}\,\mathrm{mol/L}. Each formula unit releases two M\mathrm{M} ions, so [M]=2s[\mathrm{M}]=2s.

  4. Kadi namba 4

    Swali

    Why does a pure solid have no concentration term in its KspK_{\mathrm{sp}} expression?

    Jibu

    Its activity is 11. Multiplying or dividing by 11 leaves the equilibrium expression unchanged.

  5. Kadi namba 5

    Swali

    One formula unit of solid MX2\mathrm{MX_2} releases one M\mathrm{M} and two X\mathrm{X} ions. Write KspK_{\mathrm{sp}} in terms of the equilibrium ion concentrations.

    Jibu

    Ksp=[M][X]2K_{\mathrm{sp}}=[\mathrm{M}][\mathrm{X}]^2. Each exponent comes from the corresponding coefficient in the balanced dissolution equation.

  6. Kadi namba 6

    Swali

    When ss mol/L of a hypothetical M3X\mathrm{M_3X} salt dissolves into its ions, how much does each ion concentration increase?

    Jibu

    Δ[M]=3s\Delta[\mathrm{M}]=3s and Δ[X]=s\Delta[\mathrm{X}]=s. Each formula unit releases three M\mathrm{M} ions and one X\mathrm{X} ion.

  7. Kadi namba 7

    Swali

    A saturated solution of M2X\mathrm{M_2X} in pure water has [M]=7.6×10−5 mol/L[\mathrm{M}]=7.6\times10^{-5}\,\mathrm{mol/L}. What is its molar solubility?

    Jibu

    3.8×10−5 mol/L3.8\times10^{-5}\,\mathrm{mol/L}. Divide the cation concentration by 22 because each formula unit releases two M\mathrm{M} ions.

  8. Kadi namba 8

    Swali

    What quantity does the numerical molarity approximate for each ion in a dilute-solution KspK_{\mathrm{sp}} calculation?

    Jibu

    The ion's activity. The concentration model uses the concentration divided by 1 mol/L1\,\mathrm{mol/L} for each ion's activity.

  9. Kadi namba 9

    Swali

    A hypothetical 1:1 salt dissolves to s=1.7×10−4 mol/Ls=1.7\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Jibu

    2.9×10−82.9\times10^{-8}. Both ion concentrations equal ss, so Ksp=(1.7×10−4)2=2.89×10−8K_{\mathrm{sp}}=(1.7\times10^{-4})^2=2.89\times10^{-8} before rounding.

  10. Kadi namba 10

    Swali

    A hypothetical MX2\mathrm{MX_2} salt has s=2.6×10−4 mol/Ls=2.6\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Jibu

    7.0×10−117.0\times10^{-11}. Use s(2s)2=4s3s(2s)^2=4s^3. With the given ss, this is 4(2.6×10−4)34(2.6\times10^{-4})^3.

  11. Kadi namba 11

    Swali

    In a saturated MX3\mathrm{MX_3} solution, [M]=1.4×10−5 mol/L[\mathrm{M}]=1.4\times10^{-5}\,\mathrm{mol/L} and [X]=4.2×10−5 mol/L[\mathrm{X}]=4.2\times10^{-5}\,\mathrm{mol/L}. Find KspK_{\mathrm{sp}}.

    Jibu

    1.0×10−181.0\times10^{-18}. The coefficient of X\mathrm{X} is 33, so use (1.4×10−5)(4.2×10−5)3(1.4\times10^{-5})(4.2\times10^{-5})^3.

  12. Kadi namba 12

    Swali

    A hypothetical M2X3\mathrm{M_2X_3} salt has s=2.0×10−4 mol/Ls=2.0\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Jibu

    3.5×10−173.5\times10^{-17}. The product is (2s)2(3s)3(2s)^2(3s)^3.

    (4.0×10−4)2(6.0×10−4)3=3.456×10−17(4.0\times10^{-4})^2(6.0\times10^{-4})^3 = 3.456\times10^{-17}
  13. Kadi namba 13

    Swali

    A hypothetical 1:1 salt has Ksp=6.4×10−9K_{\mathrm{sp}}=6.4\times10^{-9}. Find its molar solubility in pure water.

    Jibu

    8.0×10−5 mol/L8.0\times10^{-5}\,\mathrm{mol/L}. Since both ion concentrations equal ss, take the positive square root of KspK_{\mathrm{sp}}.

  14. Kadi namba 14

    Swali

    Two hypothetical salts have the same KspK_{\mathrm{sp}} at the same temperature. What else do you need to know to compare their molar solubilities in pure water?

    Jibu

    The balanced dissolution equations. Their ion coefficients determine the relationship between KspK_{\mathrm{sp}} and ss, so equal products can give different molar solubilities.

  15. Kadi namba 15

    Swali

    A hypothetical MX2\mathrm{MX_2} salt has Ksp=5.0×10−13K_{\mathrm{sp}}=5.0\times10^{-13}. Find its molar solubility in pure water.

    Jibu

    5.0×10−5 mol/L5.0\times10^{-5}\,\mathrm{mol/L}. Since Ksp=s(2s)2=4s3K_{\mathrm{sp}}=s(2s)^2=4s^3, divide the given value by 44 and take the cube root.

  16. Kadi namba 16

    Swali

    A saturated solution contains 91.0 mg/L91.0\,\mathrm{mg/L} of dissolved salt. Its molar mass is 182.0 g/mol182.0\,\mathrm{g/mol}. Find the molar solubility.

    Jibu

    5.00×10−4 mol/L5.00\times10^{-4}\,\mathrm{mol/L}. Convert the numerator to 0.0910 g/L0.0910\,\mathrm{g/L}, then divide by 182.0 g/mol182.0\,\mathrm{g/mol}.

  17. Kadi namba 17

    Swali

    A hypothetical M2X3\mathrm{M_2X_3} salt has Ksp=2.6×10−16K_{\mathrm{sp}}=2.6\times10^{-16}. Find its molar solubility in pure water.

    Jibu

    3.0×10−4 mol/L3.0\times10^{-4}\,\mathrm{mol/L}. Since (2s)2(3s)3=108s5(2s)^2(3s)^3=108s^5, divide by 108108 and take the fifth root.

  18. Kadi namba 18

    Swali

    A soluble source salt releases two X\mathrm{X} ions per formula unit. The solution contains 0.0030 mol/L0.0030\,\mathrm{mol/L} of the source salt. What is [X][\mathrm{X}] before adding solid MX2\mathrm{MX_2}?

    Jibu

    0.0060 mol/L0.0060\,\mathrm{mol/L}. The source salt supplies two moles of X\mathrm{X} per mole of dissolved source salt.

  19. Kadi namba 19

    Swali

    At a fixed temperature, how does an anion already present in solution affect the molar solubility of a salt that releases that same anion? Use the model with dissolution as the only equilibrium.

    Jibu

    It lowers molar solubility compared with pure water. With more anion already present, less solid needs to dissolve for the ion product to reach KspK_{\mathrm{sp}}.

  20. Kadi namba 20

    Swali

    Solid MX2\mathrm{MX_2} dissolves in a solution with initial [X]=0.012 mol/L[\mathrm{X}]=0.012\,\mathrm{mol/L} and no M\mathrm{M} ions. What exact equation relates KspK_{\mathrm{sp}} to molar solubility ss in the concentration model?

    Jibu

    Ksp=s(0.012+2s)2K_{\mathrm{sp}}=s(0.012+2s)^2. The background concentration and the amount released by the solid both belong inside the squared anion term.

  21. Kadi namba 21

    Swali

    For a 1:1 salt, an estimate gives s=2.8×10−4 mol/Ls=2.8\times10^{-4}\,\mathrm{mol/L} with initial common-ion concentration 0.014 mol/L0.014\,\mathrm{mol/L}. Does the ignored increment meet a 5% limit relative to the initial concentration?

    Jibu

    Yes. The ignored increment is ss, which is (2.8×10−4/0.014)×100%=2.0%(2.8\times10^{-4}/0.014)\times100\%=2.0\% of the initial concentration.

  22. Kadi namba 22

    Swali

    A 1:1 salt has Ksp=5.0×10−8K_{\mathrm{sp}}=5.0\times10^{-8} at this temperature. One ion starts at 4.0×10−4 mol/L4.0\times10^{-4}\,\mathrm{mol/L} and the other at zero. Find ss using both equilibrium concentrations.

    Jibu

    1.0×10−4 mol/L1.0\times10^{-4}\,\mathrm{mol/L}. It is the positive solution of s(4.0×10−4+s)=5.0×10−8s(4.0\times10^{-4}+s)=5.0\times10^{-8}. Substitution gives (1.0×10−4)(5.0×10−4)(1.0\times10^{-4})(5.0\times10^{-4}).

  23. Kadi namba 23

    Swali

    An added common ion changes how much solid dissolves. At the same temperature with the same solid phase, what happens to KspK_{\mathrm{sp}}?

    Jibu

    It stays the same. For that solid at fixed temperature, the equilibrium constant is fixed and the equilibrium ion concentrations adjust.

  24. Kadi namba 24

    Swali

    Solid M2X\mathrm{M_2X} has Ksp=4.0×10−8K_{\mathrm{sp}}=4.0\times10^{-8}. Initially [M]=0.025 mol/L[\mathrm{M}]=0.025\,\mathrm{mol/L} and [X]=0[\mathrm{X}]=0. Estimate ss by treating the common-ion concentration as constant.

    Jibu

    6.4×10−5 mol/L6.4\times10^{-5}\,\mathrm{mol/L}. Use Ksp≈(0.025)2sK_{\mathrm{sp}}\approx(0.025)^2s and divide by (0.025)2(0.025)^2.

  25. Kadi namba 25

    Swali

    An estimate for M2X\mathrm{M_2X} gives s=1.6×10−4 mol/Ls=1.6\times10^{-4}\,\mathrm{mol/L} in a solution with initial [M]=5.0×10−3 mol/L[\mathrm{M}]=5.0\times10^{-3}\,\mathrm{mol/L}. A 5% limit applies to the ignored increment relative to the initial concentration. Does the estimate pass?

    Jibu

    No. The omitted increment is 2s2s, so the change is (3.2×10−4/(5.0×10−3))×100%=6.4%(3.2\times10^{-4}/(5.0\times10^{-3}))\times100\%=6.4\%. Keep 2s2s in the cation term.

  26. Kadi namba 26

    Swali

    For a 1:1 salt with Ksp=1.4×10−6K_{\mathrm{sp}}=1.4\times10^{-6}, one ion starts at 7.0×10−3 mol/L7.0\times10^{-3}\,\mathrm{mol/L} and the other at zero. Does s=2.0×10−4 mol/Ls=2.0\times10^{-4}\,\mathrm{mol/L} give a full ion product within 4% of KspK_{\mathrm{sp}}?

    Jibu

    Yes. The full product is (2.0×10−4)(7.2×10−3)=1.44×10−6(2.0\times10^{-4})(7.2\times10^{-3})=1.44\times10^{-6}. The absolute difference is 4.0×10−84.0\times10^{-8}, about 2.9%2.9\% of KspK_{\mathrm{sp}}.

Pale crystals resting in a clear glass dish of liquid

kadi 26

Ksp and Molar Solubility Flashcards

Soma kundi hili la kadi bila malipo

Nibomo itafunguka ili uanze kusoma.

Makundi ya kadi yanayofanana