Ksp and Molar Solubility Flashcards

Calculate Ksp and molar solubility in both directions, set up common-ion problems, and check approximations.

Sobre este baralho

Practice Ksp and molar solubility with original, short problems for introductory chemistry. The examples use hypothetical salts and values in a dilute-solution model at fixed temperature, with dissolution as the only equilibrium.

Start by balancing a dissolution equation, turning coefficients into ion concentration changes and Ksp exponents, and converting between molar solubility and a single ion concentration. Then calculate Ksp from molar solubility and work back from Ksp to molar solubility for 1:1, 1:2, and 2:3 ion ratios. Two cards also practice using given equilibrium ion concentrations to find Ksp and converting mass per liter to moles per liter.

Finish with common ions. Work out the starting ion concentration, place it in the equilibrium expression, and solve for molar solubility with and without the small-change approximation. Check the size of the omitted change against a stated tolerance or substitute the estimate into the full product to check its residual.

These cards isolate individual setup steps and leave the full initial–change–equilibrium table for a worksheet, where you can practice all the steps together. Precipitation after mixing is a separate calculation that starts with post-mix concentrations and uses Qsp to decide whether precipitation is favored. The examples here focus on saturated solutions.

The prompts, worked answers, problem selection, and order are original. The cover is an AI-generated illustration for Nibomo. The original material is available under CC0 1.0 to the extent rights apply.

Cartões deste baralho

  1. Cartão 1

    Pergunta

    What does molar solubility ss measure for an ionic solid, and what unit does it use?

    Resposta

    The moles of solid that dissolve per liter of saturated solution at a given temperature, in mol/L\mathrm{mol/L}. Count moles of formula units.

  2. Cartão 2

    Pergunta

    Write the balanced dissolution equation for solid M2X3\mathrm{M_2X_3}, which releases M3+\mathrm{M^{3+}} and X2−\mathrm{X^{2-}}.

    Resposta

    M2X3(s)⇌2M3+(aq)+3X2−(aq)\mathrm{M_2X_3(s)} \rightleftharpoons 2\mathrm{M^{3+}(aq)} + 3\mathrm{X^{2-}(aq)}

    Two cations and three anions balance both the atoms and the charge.

  3. Cartão 3

    Pergunta

    A hypothetical M2X\mathrm{M_2X} salt has molar solubility 3.2×10−4 mol/L3.2\times10^{-4}\,\mathrm{mol/L} in pure water. What is [M][\mathrm{M}]?

    Resposta

    6.4×10−4 mol/L6.4\times10^{-4}\,\mathrm{mol/L}. Each formula unit releases two M\mathrm{M} ions, so [M]=2s[\mathrm{M}]=2s.

  4. Cartão 4

    Pergunta

    Why does a pure solid have no concentration term in its KspK_{\mathrm{sp}} expression?

    Resposta

    Its activity is 11. Multiplying or dividing by 11 leaves the equilibrium expression unchanged.

  5. Cartão 5

    Pergunta

    One formula unit of solid MX2\mathrm{MX_2} releases one M\mathrm{M} and two X\mathrm{X} ions. Write KspK_{\mathrm{sp}} in terms of the equilibrium ion concentrations.

    Resposta

    Ksp=[M][X]2K_{\mathrm{sp}}=[\mathrm{M}][\mathrm{X}]^2. Each exponent comes from the corresponding coefficient in the balanced dissolution equation.

  6. Cartão 6

    Pergunta

    When ss mol/L of a hypothetical M3X\mathrm{M_3X} salt dissolves into its ions, how much does each ion concentration increase?

    Resposta

    Δ[M]=3s\Delta[\mathrm{M}]=3s and Δ[X]=s\Delta[\mathrm{X}]=s. Each formula unit releases three M\mathrm{M} ions and one X\mathrm{X} ion.

  7. Cartão 7

    Pergunta

    A saturated solution of M2X\mathrm{M_2X} in pure water has [M]=7.6×10−5 mol/L[\mathrm{M}]=7.6\times10^{-5}\,\mathrm{mol/L}. What is its molar solubility?

    Resposta

    3.8×10−5 mol/L3.8\times10^{-5}\,\mathrm{mol/L}. Divide the cation concentration by 22 because each formula unit releases two M\mathrm{M} ions.

  8. Cartão 8

    Pergunta

    What quantity does the numerical molarity approximate for each ion in a dilute-solution KspK_{\mathrm{sp}} calculation?

    Resposta

    The ion's activity. The concentration model uses the concentration divided by 1 mol/L1\,\mathrm{mol/L} for each ion's activity.

  9. Cartão 9

    Pergunta

    A hypothetical 1:1 salt dissolves to s=1.7×10−4 mol/Ls=1.7\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Resposta

    2.9×10−82.9\times10^{-8}. Both ion concentrations equal ss, so Ksp=(1.7×10−4)2=2.89×10−8K_{\mathrm{sp}}=(1.7\times10^{-4})^2=2.89\times10^{-8} before rounding.

  10. Cartão 10

    Pergunta

    A hypothetical MX2\mathrm{MX_2} salt has s=2.6×10−4 mol/Ls=2.6\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Resposta

    7.0×10−117.0\times10^{-11}. Use s(2s)2=4s3s(2s)^2=4s^3. With the given ss, this is 4(2.6×10−4)34(2.6\times10^{-4})^3.

  11. Cartão 11

    Pergunta

    In a saturated MX3\mathrm{MX_3} solution, [M]=1.4×10−5 mol/L[\mathrm{M}]=1.4\times10^{-5}\,\mathrm{mol/L} and [X]=4.2×10−5 mol/L[\mathrm{X}]=4.2\times10^{-5}\,\mathrm{mol/L}. Find KspK_{\mathrm{sp}}.

    Resposta

    1.0×10−181.0\times10^{-18}. The coefficient of X\mathrm{X} is 33, so use (1.4×10−5)(4.2×10−5)3(1.4\times10^{-5})(4.2\times10^{-5})^3.

  12. Cartão 12

    Pergunta

    A hypothetical M2X3\mathrm{M_2X_3} salt has s=2.0×10−4 mol/Ls=2.0\times10^{-4}\,\mathrm{mol/L} in pure water. Find KspK_{\mathrm{sp}}.

    Resposta

    3.5×10−173.5\times10^{-17}. The product is (2s)2(3s)3(2s)^2(3s)^3.

    (4.0×10−4)2(6.0×10−4)3=3.456×10−17(4.0\times10^{-4})^2(6.0\times10^{-4})^3 = 3.456\times10^{-17}
  13. Cartão 13

    Pergunta

    A hypothetical 1:1 salt has Ksp=6.4×10−9K_{\mathrm{sp}}=6.4\times10^{-9}. Find its molar solubility in pure water.

    Resposta

    8.0×10−5 mol/L8.0\times10^{-5}\,\mathrm{mol/L}. Since both ion concentrations equal ss, take the positive square root of KspK_{\mathrm{sp}}.

  14. Cartão 14

    Pergunta

    Two hypothetical salts have the same KspK_{\mathrm{sp}} at the same temperature. What else do you need to know to compare their molar solubilities in pure water?

    Resposta

    The balanced dissolution equations. Their ion coefficients determine the relationship between KspK_{\mathrm{sp}} and ss, so equal products can give different molar solubilities.

  15. Cartão 15

    Pergunta

    A hypothetical MX2\mathrm{MX_2} salt has Ksp=5.0×10−13K_{\mathrm{sp}}=5.0\times10^{-13}. Find its molar solubility in pure water.

    Resposta

    5.0×10−5 mol/L5.0\times10^{-5}\,\mathrm{mol/L}. Since Ksp=s(2s)2=4s3K_{\mathrm{sp}}=s(2s)^2=4s^3, divide the given value by 44 and take the cube root.

  16. Cartão 16

    Pergunta

    A saturated solution contains 91.0 mg/L91.0\,\mathrm{mg/L} of dissolved salt. Its molar mass is 182.0 g/mol182.0\,\mathrm{g/mol}. Find the molar solubility.

    Resposta

    5.00×10−4 mol/L5.00\times10^{-4}\,\mathrm{mol/L}. Convert the numerator to 0.0910 g/L0.0910\,\mathrm{g/L}, then divide by 182.0 g/mol182.0\,\mathrm{g/mol}.

  17. Cartão 17

    Pergunta

    A hypothetical M2X3\mathrm{M_2X_3} salt has Ksp=2.6×10−16K_{\mathrm{sp}}=2.6\times10^{-16}. Find its molar solubility in pure water.

    Resposta

    3.0×10−4 mol/L3.0\times10^{-4}\,\mathrm{mol/L}. Since (2s)2(3s)3=108s5(2s)^2(3s)^3=108s^5, divide by 108108 and take the fifth root.

  18. Cartão 18

    Pergunta

    A soluble source salt releases two X\mathrm{X} ions per formula unit. The solution contains 0.0030 mol/L0.0030\,\mathrm{mol/L} of the source salt. What is [X][\mathrm{X}] before adding solid MX2\mathrm{MX_2}?

    Resposta

    0.0060 mol/L0.0060\,\mathrm{mol/L}. The source salt supplies two moles of X\mathrm{X} per mole of dissolved source salt.

  19. Cartão 19

    Pergunta

    At a fixed temperature, how does an anion already present in solution affect the molar solubility of a salt that releases that same anion? Use the model with dissolution as the only equilibrium.

    Resposta

    It lowers molar solubility compared with pure water. With more anion already present, less solid needs to dissolve for the ion product to reach KspK_{\mathrm{sp}}.

  20. Cartão 20

    Pergunta

    Solid MX2\mathrm{MX_2} dissolves in a solution with initial [X]=0.012 mol/L[\mathrm{X}]=0.012\,\mathrm{mol/L} and no M\mathrm{M} ions. What exact equation relates KspK_{\mathrm{sp}} to molar solubility ss in the concentration model?

    Resposta

    Ksp=s(0.012+2s)2K_{\mathrm{sp}}=s(0.012+2s)^2. The background concentration and the amount released by the solid both belong inside the squared anion term.

  21. Cartão 21

    Pergunta

    For a 1:1 salt, an estimate gives s=2.8×10−4 mol/Ls=2.8\times10^{-4}\,\mathrm{mol/L} with initial common-ion concentration 0.014 mol/L0.014\,\mathrm{mol/L}. Does the ignored increment meet a 5% limit relative to the initial concentration?

    Resposta

    Yes. The ignored increment is ss, which is (2.8×10−4/0.014)×100%=2.0%(2.8\times10^{-4}/0.014)\times100\%=2.0\% of the initial concentration.

  22. Cartão 22

    Pergunta

    A 1:1 salt has Ksp=5.0×10−8K_{\mathrm{sp}}=5.0\times10^{-8} at this temperature. One ion starts at 4.0×10−4 mol/L4.0\times10^{-4}\,\mathrm{mol/L} and the other at zero. Find ss using both equilibrium concentrations.

    Resposta

    1.0×10−4 mol/L1.0\times10^{-4}\,\mathrm{mol/L}. It is the positive solution of s(4.0×10−4+s)=5.0×10−8s(4.0\times10^{-4}+s)=5.0\times10^{-8}. Substitution gives (1.0×10−4)(5.0×10−4)(1.0\times10^{-4})(5.0\times10^{-4}).

  23. Cartão 23

    Pergunta

    An added common ion changes how much solid dissolves. At the same temperature with the same solid phase, what happens to KspK_{\mathrm{sp}}?

    Resposta

    It stays the same. For that solid at fixed temperature, the equilibrium constant is fixed and the equilibrium ion concentrations adjust.

  24. Cartão 24

    Pergunta

    Solid M2X\mathrm{M_2X} has Ksp=4.0×10−8K_{\mathrm{sp}}=4.0\times10^{-8}. Initially [M]=0.025 mol/L[\mathrm{M}]=0.025\,\mathrm{mol/L} and [X]=0[\mathrm{X}]=0. Estimate ss by treating the common-ion concentration as constant.

    Resposta

    6.4×10−5 mol/L6.4\times10^{-5}\,\mathrm{mol/L}. Use Ksp≈(0.025)2sK_{\mathrm{sp}}\approx(0.025)^2s and divide by (0.025)2(0.025)^2.

  25. Cartão 25

    Pergunta

    An estimate for M2X\mathrm{M_2X} gives s=1.6×10−4 mol/Ls=1.6\times10^{-4}\,\mathrm{mol/L} in a solution with initial [M]=5.0×10−3 mol/L[\mathrm{M}]=5.0\times10^{-3}\,\mathrm{mol/L}. A 5% limit applies to the ignored increment relative to the initial concentration. Does the estimate pass?

    Resposta

    No. The omitted increment is 2s2s, so the change is (3.2×10−4/(5.0×10−3))×100%=6.4%(3.2\times10^{-4}/(5.0\times10^{-3}))\times100\%=6.4\%. Keep 2s2s in the cation term.

  26. Cartão 26

    Pergunta

    For a 1:1 salt with Ksp=1.4×10−6K_{\mathrm{sp}}=1.4\times10^{-6}, one ion starts at 7.0×10−3 mol/L7.0\times10^{-3}\,\mathrm{mol/L} and the other at zero. Does s=2.0×10−4 mol/Ls=2.0\times10^{-4}\,\mathrm{mol/L} give a full ion product within 4% of KspK_{\mathrm{sp}}?

    Resposta

    Yes. The full product is (2.0×10−4)(7.2×10−3)=1.44×10−6(2.0\times10^{-4})(7.2\times10^{-3})=1.44\times10^{-6}. The absolute difference is 4.0×10−84.0\times10^{-8}, about 2.9%2.9\% of KspK_{\mathrm{sp}}.

Pale crystals resting in a clear glass dish of liquid

26 cartões

Ksp and Molar Solubility Flashcards

Estude este baralho de graça

O Nibomo abre para você começar a estudar.

Baralhos parecidos