What separates a vector quantity from a scalar quantity?

A vector has magnitude and direction; a scalar has magnitude only. Velocity is a vector, while speed is a scalar.

When is the point-object model useful in kinematics?

When an object's size and rotation do not matter for the motion being studied. Its position can then represent the whole object.

When may the constant-acceleration kinematic equations be used?

Only over an interval with constant acceleration. They are not general formulas for changing acceleration.

Why must a velocity statement name or imply a reference frame?

Velocity depends on the observer's frame. The same object can be at rest in one frame and moving in another.

Why can horizontal and vertical projectile motion be analyzed separately?

Perpendicular components evolve independently. With negligible air resistance, gravity changes only the vertical component.

Can an object have zero velocity and nonzero acceleration at one instant?

Yes. At the top of a vertical toss, velocity is momentarily zero while gravitational acceleration still points downward.

A runner completes one lap and returns to the start. How do distance and displacement compare?

The distance is one lap, while the displacement is zero. Displacement depends only on the change from initial to final position.

What makes a reference frame convenient for a motion problem?

It makes the relevant positions or velocities simple. A good frame reduces bookkeeping without changing physical predictions.

How are the components of a launch velocity v at angle θ found?

v_x = v cos θ and v_y = v sin θ. The angle is measured from the positive horizontal axis.

What does average velocity measure?

Displacement per elapsed time. In one dimension, v_avg = Δx/Δt; direction comes from the sign of Δx.

Do a vector's magnitude and its component use different SI units?

No. A vector and each of its components use the same unit; for example, velocity and its x-component both use m/s.

A velocity-versus-time graph curves upward and becomes progressively steeper while staying above zero. What does that show?

The object moves in the positive direction and speeds up with increasing positive acceleration. The graph's slope is acceleration; because that slope changes, the acceleration is nonuniform.

What are a projectile's horizontal and vertical accelerations when air resistance is negligible and up is positive?

a_x = 0 and a_y = -g. Horizontal velocity stays constant while vertical velocity changes.

What does average acceleration measure?

Change in velocity per elapsed time. In one dimension, a_avg = Δv/Δt.

What does a negative one-dimensional vector component mean?

It points opposite the chosen positive direction. The minus sign describes direction, not a negative physical size.

For constant acceleration, what does v = v₀ + at retrieve?

Velocity after elapsed time t. Use it when initial velocity, constant acceleration, and time are known or related.

How are a vector's magnitude and direction reconstructed from perpendicular components v_x and v_y?

v = √(v_x² + v_y²). When v_x ≠ 0, use θ = tan⁻¹(v_y/v_x) and the component signs to choose the quadrant. If v_x = 0 and v_y ≠ 0, the vector points along +y or -y; if both components are zero, its direction is undefined.

At an instant when velocity is nonzero, how do velocity and acceleration signs show whether a one-dimensional object is speeding up?

It speeds up when velocity and acceleration have the same sign. Opposite signs mean speed is decreasing at that instant.

What does the slope of a position-versus-time graph represent?

Velocity. A steeper slope means a larger speed, and the slope's sign gives direction.

Two observers use inertial frames, where an object with zero net force has constant velocity. If the observers move at constant velocity relative to each other, do they agree on an object's acceleration?

Yes, in a Galilean inertial-frame model. Subtracting a constant frame velocity changes velocity but not acceleration. This definition distinguishes an inertial frame from an accelerating, noninertial frame.

A projectile lands at its launch height with negligible air resistance. How do its launch and landing speeds compare?

They are equal. The horizontal component is unchanged, and the vertical component returns with equal magnitude and opposite sign.

A car's velocity changes from -2 m/s to +6 m/s in 2 s. What is its average acceleration?

+4 m/s². Δv = 8 m/s, and 8 m/s ÷ 2 s = 4 m/s².

If the positive axis is reversed, what happens to a one-dimensional vector component and its magnitude?

The component changes sign, while the magnitude stays the same. A coordinate choice changes the signed description, not the physical vector.

For constant acceleration, what does Δx = v₀t + ½at² retrieve?

Displacement over time t. It includes both initial-velocity motion and the displacement added by constant acceleration.

For a horizontal launch from height h in uniform gravity with negligible air resistance, what sets the time to reach the ground?

The vertical drop alone. Starting with v_y = 0, the time follows h = ½gt² and does not depend on horizontal speed.

Why can average speed differ from the magnitude of average velocity?

Average speed uses total distance, while average velocity uses displacement. Reversing direction increases distance without necessarily increasing displacement.

What does the slope of a velocity-versus-time graph represent?

Acceleration. The slope's units are (m/s)/s = m/s².

A passenger walks forward at 2 m/s inside a train moving forward at 18 m/s. What is the passenger's ground velocity?

20 m/s forward. Add the passenger's train-relative velocity to the train's ground velocity.

Does projectile mass affect the ideal trajectory when air resistance is negligible?

No. All projectiles have the same gravitational acceleration, so equal initial conditions give equal trajectories.

Can an object have nonzero velocity and zero acceleration?

Yes. Constant-velocity motion has nonzero velocity while the velocity change, and therefore acceleration, is zero.

A cart starts from rest with constant acceleration. Which graph should be linear if x = x₀ + ½at² applies?

Position x versus t². Its slope is ½a when the initial velocity is zero.

What does signed area under a velocity-versus-time graph represent?

Displacement. Area below the time axis contributes negative displacement.

At the highest point of a projectile's path, what are its vertical velocity and vertical acceleration?

v_y = 0, but a_y = -g. The vertical velocity pauses before reversing; gravity does not switch off.

How can a motion sensor test whether a cart moves at constant velocity?

Record position at equal time intervals and graph position versus time. A straight line with nearly constant slope supports constant velocity.

A car passes a parked observer at 12 m/s. What is the parked observer's velocity in the car's frame?

-12 m/s. In the car's frame, the ground and observer move backward at the car's speed.

Which constant-acceleration equation connects speed and displacement without using time?

v² = v₀² + 2aΔx. Use signed one-dimensional quantities and constant acceleration.

How could video data test the independence of projectile components?

Track x and y at equal times. A linear x-versus-t graph and a quadratic vertical trend support constant horizontal velocity and vertical acceleration.

A velocity-versus-time graph stays below zero but slopes upward toward zero. What is happening?

The object moves in the negative direction while slowing down. Velocity is negative and acceleration is positive.

How can average velocity over a very short interval approximate instantaneous velocity?

Shrink the time interval around the instant. The displacement divided by that short interval approaches the local position–time graph slope.

A walker moves 7 m east, then 3 m west. What is the one-dimensional displacement if east is positive?

+4 m. Add signed displacements: +7 m + (-3 m) = +4 m.

What shape is the path of a projectile with a nonzero horizontal velocity component in a uniform gravitational field when air resistance is negligible?

A parabola. Constant horizontal velocity and constant vertical acceleration produce the curve. A purely vertical launch is the special case: its spatial path is a vertical line.

In a motion diagram with dots at equal time intervals and velocity arrows, what do wider dot spacing and longer arrows show?

Greater speed. Wider spacing means more distance is covered during each equal time interval, while longer velocity arrows represent a larger velocity magnitude. Each arrow points in the direction of motion.

What does signed area under an acceleration-versus-time graph represent?

Change in velocity. Add that signed area to the initial velocity to find the final velocity.

How is one-dimensional relative velocity calculated for two objects A and B?

v_A relative to B = v_A - v_B. Both velocities must be measured in the same frame before subtracting.

When its speed is nonzero, what direction does a projectile's instantaneous velocity point?

Tangent to its path. Its horizontal and vertical velocity components combine to set that direction.

What does choosing a system boundary decide in a mechanics problem?

It decides which objects belong to the system and which forces count as external. Internal interactions occur between objects inside the boundary.

What belongs on a free-body diagram for one chosen object?

Only forces exerted on that object by other objects. Do not draw velocity, acceleration, or forces the chosen object exerts elsewhere.

What assumptions define the ideal-string model used in introductory algebra-based physics?

The string is massless, inextensible, and flexible. It pulls along its length, doesn't stretch, and can redirect around an ideal pulley.

What does translational equilibrium require?

Zero net force. The object may be at rest or move with constant velocity.

In an inertial frame, how does Newton's second law connect force and motion?

ΣF = ma. The net external force on the chosen object or system causes its acceleration; mass sets how strongly the velocity responds.

How do mass and weight differ?

Mass measures inertia in kilograms; weight is gravitational force in newtons. Near a surface, F_g = mg.

AP Physics 1 Flashcards: Complete 8-Unit Course Review

A 400-card AP Physics 1 review of concepts, formulas, graphs, experiments, and reasoning across all eight course units.

Yazan Open Study Contributor

Bu deste hakkında

This 400-card deck reviews all eight AP Physics 1 course units: Kinematics; Force and Translational Dynamics; Work, Energy, and Power; Linear Momentum; Torque and Rotational Dynamics; Energy and Momentum of Rotating Systems; Oscillations; and Fluids.

What you'll retrieve

Choose the governing principle for a situation or claim, then explain the prediction in plain language.
Recall what a quantity or equation means, when it applies, how it scales, and which SI unit it uses.
Read slopes, signed areas, extrema, signs, and shapes across motion, force, energy, momentum, rotation, oscillation, and fluid graphs.
Plan a small experiment by naming useful variables, measurements, controls, linearized graphs, slope meanings, and uncertainty checks.
Solve one focused original algebra-based setup with units and a short reason.
Use selected reverse and contrast prompts to recognize conditions and separate common confusion pairs.

The deck does not mechanically reverse every fact. Bare formula-to-symbol lists, long multipart calculations, and imitation exam questions are excluded.

The sequence follows Units 1–8 so motion, forces, energy, and momentum become prerequisites for rotation, orbits, oscillations, and fluids. Definitions appear before dependent uses, while related formula, graph, condition, calculation, and contrast prompts are separated where practical to reduce short-range cueing.

Course scope was checked against the official AP Physics 1 course page. Every prompt, answer, numerical setup, explanation, ordering choice, and metadata field was independently written from common physics knowledge. The CC0 label applies to that original expression and organization to the extent applicable rights exist; it does not claim ownership of physics facts or third-party material.

This is an independently authored, unofficial educational deck. It is not affiliated with, sponsored by, or endorsed by the College Board. AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this product. No AP exam questions, answer keys, scoring guidelines, curriculum text, logos, or trade dress were copied.

Bu destedeki kartlar

Kart 1
Soru
What separates a vector quantity from a scalar quantity?
Cevap
A vector has magnitude and direction; a scalar has magnitude only. Velocity is a vector, while speed is a scalar.
Kart 2
Soru
When is the point-object model useful in kinematics?
Cevap
When an object's size and rotation do not matter for the motion being studied. Its position can then represent the whole object.
Kart 3
Soru
When may the constant-acceleration kinematic equations be used?
Cevap
Only over an interval with constant acceleration. They are not general formulas for changing acceleration.
Kart 4
Soru
Why must a velocity statement name or imply a reference frame?
Cevap
Velocity depends on the observer's frame. The same object can be at rest in one frame and moving in another.
Kart 5
Soru
Why can horizontal and vertical projectile motion be analyzed separately?
Cevap
Perpendicular components evolve independently. With negligible air resistance, gravity changes only the vertical component.
Kart 6
Soru
Can an object have zero velocity and nonzero acceleration at one instant?
Cevap
Yes. At the top of a vertical toss, velocity is momentarily zero while gravitational acceleration still points downward.
Kart 7
Soru
A runner completes one lap and returns to the start. How do distance and displacement compare?
Cevap
The distance is one lap, while the displacement is zero. Displacement depends only on the change from initial to final position.
Kart 8
Soru
What makes a reference frame convenient for a motion problem?
Cevap
It makes the relevant positions or velocities simple. A good frame reduces bookkeeping without changing physical predictions.
Kart 9
Soru
How are the components of a launch velocity v at angle θ found?
Cevap
v_x = v cos θ and v_y = v sin θ. The angle is measured from the positive horizontal axis.
Kart 10
Soru
What does average velocity measure?
Cevap
Displacement per elapsed time. In one dimension, v_avg = Δx/Δt; direction comes from the sign of Δx.
Kart 11
Soru
Do a vector's magnitude and its component use different SI units?
Cevap
No. A vector and each of its components use the same unit; for example, velocity and its x-component both use m/s.
Kart 12
Soru
A velocity-versus-time graph curves upward and becomes progressively steeper while staying above zero. What does that show?
Cevap
The object moves in the positive direction and speeds up with increasing positive acceleration. The graph's slope is acceleration; because that slope changes, the acceleration is nonuniform.
Kart 13
Soru
What are a projectile's horizontal and vertical accelerations when air resistance is negligible and up is positive?
Cevap
a_x = 0 and a_y = -g. Horizontal velocity stays constant while vertical velocity changes.
Kart 14
Soru
What does average acceleration measure?
Cevap
Change in velocity per elapsed time. In one dimension, a_avg = Δv/Δt.
Kart 15
Soru
What does a negative one-dimensional vector component mean?
Cevap
It points opposite the chosen positive direction. The minus sign describes direction, not a negative physical size.
Kart 16
Soru
For constant acceleration, what does v = v₀ + at retrieve?
Cevap
Velocity after elapsed time t. Use it when initial velocity, constant acceleration, and time are known or related.
Kart 17
Soru
How are a vector's magnitude and direction reconstructed from perpendicular components v_x and v_y?
Cevap
v = √(v_x² + v_y²). When v_x ≠ 0, use θ = tan⁻¹(v_y/v_x) and the component signs to choose the quadrant. If v_x = 0 and v_y ≠ 0, the vector points along +y or -y; if both components are zero, its direction is undefined.
Kart 18
Soru
At an instant when velocity is nonzero, how do velocity and acceleration signs show whether a one-dimensional object is speeding up?
Cevap
It speeds up when velocity and acceleration have the same sign. Opposite signs mean speed is decreasing at that instant.
Kart 19
Soru
What does the slope of a position-versus-time graph represent?
Cevap
Velocity. A steeper slope means a larger speed, and the slope's sign gives direction.
Kart 20
Soru
Two observers use inertial frames, where an object with zero net force has constant velocity. If the observers move at constant velocity relative to each other, do they agree on an object's acceleration?
Cevap
Yes, in a Galilean inertial-frame model. Subtracting a constant frame velocity changes velocity but not acceleration. This definition distinguishes an inertial frame from an accelerating, noninertial frame.
Kart 21
Soru
A projectile lands at its launch height with negligible air resistance. How do its launch and landing speeds compare?
Cevap
They are equal. The horizontal component is unchanged, and the vertical component returns with equal magnitude and opposite sign.
Kart 22
Soru
A car's velocity changes from -2 m/s to +6 m/s in 2 s. What is its average acceleration?
Cevap
+4 m/s². Δv = 8 m/s, and 8 m/s ÷ 2 s = 4 m/s².
Kart 23
Soru
If the positive axis is reversed, what happens to a one-dimensional vector component and its magnitude?
Cevap
The component changes sign, while the magnitude stays the same. A coordinate choice changes the signed description, not the physical vector.
Kart 24
Soru
For constant acceleration, what does Δx = v₀t + ½at² retrieve?
Cevap
Displacement over time t. It includes both initial-velocity motion and the displacement added by constant acceleration.
Kart 25
Soru
For a horizontal launch from height h in uniform gravity with negligible air resistance, what sets the time to reach the ground?
Cevap
The vertical drop alone. Starting with v_y = 0, the time follows h = ½gt² and does not depend on horizontal speed.
Kart 26
Soru
Why can average speed differ from the magnitude of average velocity?
Cevap
Average speed uses total distance, while average velocity uses displacement. Reversing direction increases distance without necessarily increasing displacement.
Kart 27
Soru
What does the slope of a velocity-versus-time graph represent?
Cevap
Acceleration. The slope's units are (m/s)/s = m/s².
Kart 28
Soru
A passenger walks forward at 2 m/s inside a train moving forward at 18 m/s. What is the passenger's ground velocity?
Cevap
20 m/s forward. Add the passenger's train-relative velocity to the train's ground velocity.
Kart 29
Soru
Does projectile mass affect the ideal trajectory when air resistance is negligible?
Cevap
No. All projectiles have the same gravitational acceleration, so equal initial conditions give equal trajectories.
Kart 30
Soru
Can an object have nonzero velocity and zero acceleration?
Cevap
Yes. Constant-velocity motion has nonzero velocity while the velocity change, and therefore acceleration, is zero.
Kart 31
Soru
A cart starts from rest with constant acceleration. Which graph should be linear if x = x₀ + ½at² applies?
Cevap
Position x versus t². Its slope is ½a when the initial velocity is zero.
Kart 32
Soru
What does signed area under a velocity-versus-time graph represent?
Cevap
Displacement. Area below the time axis contributes negative displacement.
Kart 33
Soru
At the highest point of a projectile's path, what are its vertical velocity and vertical acceleration?
Cevap
v_y = 0, but a_y = -g. The vertical velocity pauses before reversing; gravity does not switch off.
Kart 34
Soru
How can a motion sensor test whether a cart moves at constant velocity?
Cevap
Record position at equal time intervals and graph position versus time. A straight line with nearly constant slope supports constant velocity.
Kart 35
Soru
A car passes a parked observer at 12 m/s. What is the parked observer's velocity in the car's frame?
Cevap
-12 m/s. In the car's frame, the ground and observer move backward at the car's speed.
Kart 36
Soru
Which constant-acceleration equation connects speed and displacement without using time?
Cevap
v² = v₀² + 2aΔx. Use signed one-dimensional quantities and constant acceleration.
Kart 37
Soru
How could video data test the independence of projectile components?
Cevap
Track x and y at equal times. A linear x-versus-t graph and a quadratic vertical trend support constant horizontal velocity and vertical acceleration.
Kart 38
Soru
A velocity-versus-time graph stays below zero but slopes upward toward zero. What is happening?
Cevap
The object moves in the negative direction while slowing down. Velocity is negative and acceleration is positive.
Kart 39
Soru
How can average velocity over a very short interval approximate instantaneous velocity?
Cevap
Shrink the time interval around the instant. The displacement divided by that short interval approaches the local position–time graph slope.
Kart 40
Soru
A walker moves 7 m east, then 3 m west. What is the one-dimensional displacement if east is positive?
Cevap
+4 m. Add signed displacements: +7 m + (-3 m) = +4 m.
Kart 41
Soru
What shape is the path of a projectile with a nonzero horizontal velocity component in a uniform gravitational field when air resistance is negligible?
Cevap
A parabola. Constant horizontal velocity and constant vertical acceleration produce the curve. A purely vertical launch is the special case: its spatial path is a vertical line.
Kart 42
Soru
In a motion diagram with dots at equal time intervals and velocity arrows, what do wider dot spacing and longer arrows show?
Cevap
Greater speed. Wider spacing means more distance is covered during each equal time interval, while longer velocity arrows represent a larger velocity magnitude. Each arrow points in the direction of motion.
Kart 43
Soru
What does signed area under an acceleration-versus-time graph represent?
Cevap
Change in velocity. Add that signed area to the initial velocity to find the final velocity.
Kart 44
Soru
How is one-dimensional relative velocity calculated for two objects A and B?
Cevap
v_A relative to B = v_A - v_B. Both velocities must be measured in the same frame before subtracting.
Kart 45
Soru
When its speed is nonzero, what direction does a projectile's instantaneous velocity point?
Cevap
Tangent to its path. Its horizontal and vertical velocity components combine to set that direction.
Kart 46
Soru
What does choosing a system boundary decide in a mechanics problem?
Cevap
It decides which objects belong to the system and which forces count as external. Internal interactions occur between objects inside the boundary.
Kart 47
Soru
What belongs on a free-body diagram for one chosen object?
Cevap
Only forces exerted on that object by other objects. Do not draw velocity, acceleration, or forces the chosen object exerts elsewhere.
Kart 48
Soru
What assumptions define the ideal-string model used in introductory algebra-based physics?
Cevap
The string is massless, inextensible, and flexible. It pulls along its length, doesn't stretch, and can redirect around an ideal pulley.
Kart 49
Soru
What does translational equilibrium require?
Cevap
Zero net force. The object may be at rest or move with constant velocity.
Kart 50
Soru
In an inertial frame, how does Newton's second law connect force and motion?
Cevap
ΣF = ma. The net external force on the chosen object or system causes its acceleration; mass sets how strongly the velocity responds.
Kart 51
Soru
How do mass and weight differ?
Cevap
Mass measures inertia in kilograms; weight is gravitational force in newtons. Near a surface, F_g = mg.
Kart 52
Soru
How does static friction choose its magnitude before slipping begins?
Cevap
It matches the needed tangential contact force up to a maximum. In general, f_s ≤ μ_sN.
Kart 53
Soru
For an ideal spring in its linear range, what is the spring force when its end is displaced by a signed amount x from the relaxed or natural length?
Cevap
F_s = -kx. The sign shows that the spring force opposes the signed extension or compression and points toward the relaxed or natural length.
Kart 54
Soru
What direction does centripetal acceleration point in circular motion?
Cevap
Toward the circle's center. It changes the velocity's direction even when speed is constant.
Kart 55
Soru
What is the gravitational force magnitude between two point masses?
Cevap
F_g = Gm₁m₂/r². Here r is the center-to-center separation.
Kart 56
Soru
Why isn't the normal force always equal to an object's weight?
Cevap
It adjusts to the contact and acceleration conditions. Other vertical forces or vertical acceleration can change its magnitude.
Kart 57
Soru
What determines a friction coefficient in the simple model?
Cevap
The pair of contacting materials and their surface condition. It isn't a universal property of either material alone.
Kart 58
Soru
What is the centripetal-acceleration magnitude for speed v and radius r?
Cevap
a_c = v²/r. It is a kinematic requirement, not a separate force.
Kart 59
Soru
An elevator accelerates upward. How does the scale reading compare with a rider's weight?
Cevap
It is greater than the weight. Upward net force requires N - mg > 0.
Kart 60
Soru
What does a spring constant k measure, and what is its SI unit?
Cevap
It measures stiffness in N/m. A larger k means more force is needed for the same displacement in the linear range.
Kart 61
Soru
Three equal point masses are at (0,0), (3 m,0), and (0,3 m). Where is their center of mass?
Cevap
At (1 m,1 m). Average the x-coordinates and y-coordinates separately for equal masses.
Kart 62
Soru
What provides centripetal force?
Cevap
The inward component of real forces such as tension, gravity, friction, or a normal force. 'Centripetal force' names their net inward result.
Kart 63
Soru
How is near-surface gravitational field strength related to weight?
Cevap
F_g = mg. The local field strength g has units N/kg, equivalent to m/s².
Kart 64
Soru
How is weight resolved on an incline of angle θ measured from horizontal?
Cevap
mg sin θ points down the slope and mg cos θ points into the slope. These are components of one gravitational force.
Kart 65
Soru
What does Newton's third law say about an interaction between objects A and B?
Cevap
The force of A on B and the force of B on A have equal magnitude and opposite direction. They act on different objects.
Kart 66
Soru
What does signed tangential acceleration describe during circular motion?
Cevap
It describes how quickly speed changes and which way the tangential acceleration points along the chosen tangent. Its magnitude is the absolute value of the instantaneous rate of change of speed. If it points with the velocity, speed increases; if it points against the velocity, speed decreases. Its sign follows the chosen tangent.
Kart 67
Soru
What happens to gravitational force if the separation between two point masses doubles?
Cevap
It becomes one-fourth as large. The force follows an inverse-square dependence on distance.
Kart 68
Soru
How can an adjustable incline estimate a block's coefficient of static friction when no other applied force acts?
Cevap
Raise the incline slowly until the block just begins to slide. At that threshold, the simple block model gives μ_s = tan θ.
Kart 69
Soru
In an inertial frame, what determines the acceleration of a fixed-mass system's center of mass?
Cevap
The net external force divided by the system's total mass. Internal force pairs cannot change the center-of-mass motion of the whole system.
Kart 70
Soru
Which tension components act for a conical pendulum?
Cevap
The vertical component balances weight, and the horizontal component supplies centripetal force. The bob moves in a horizontal circle.
Kart 71
Soru
What does apparent weight measure for an object supported by one surface?
Cevap
The normal-force magnitude exerted by that support. It can differ from gravitational force when the object accelerates.
Kart 72
Soru
How are several forces combined to find net force?
Cevap
Add them as vectors, component by component. Opposing components subtract according to the chosen signs.
Kart 73
Soru
Why is tension uniform along one continuous ideal string?
Cevap
Every massless segment must have zero net force in the ideal model. Without frictional contact or a massive pulley changing it, the tension magnitude stays the same throughout the string.
Kart 74
Soru
A 0.5 kg object moves at 4 m/s in a circle of radius 2 m. What inward net force is required?
Cevap
4 N. F_in = mv²/r = 0.5 × 16 / 2.
Kart 75
Soru
What local equivalence links a uniform gravitational field with a uniformly accelerating reference frame?
Cevap
A uniform gravitational field and a uniformly accelerating reference frame can produce the same local mechanical effects. Local observations alone may not distinguish them.
Kart 76
Soru
For the same net force, what happens to acceleration if mass doubles?
Cevap
Acceleration is halved. From a = ΣF/m, acceleration is inversely proportional to mass.
Kart 77
Soru
How do static and kinetic friction coefficients usually compare for the same pair of surfaces?
Cevap
Typically μ_s > μ_k. Starting sliding usually requires a larger friction threshold than maintaining it.
Kart 78
Soru
How are radial and tangential acceleration combined when circular speed changes?
Cevap
Add the perpendicular components as vectors. The total magnitude is √(a_c² + a_t²).
Kart 79
Soru
A spherically symmetric planet has twice Earth's mass and the same radius. How does its surface g compare with Earth's?
Cevap
It is twice as large. Surface field strength follows g = GM/R².
Kart 80
Soru
Does a force have to point in the direction of motion?
Cevap
No. A force points in the direction of the interaction; it may speed up, slow down, or turn the object.
Kart 81
Soru
Where is the center of mass of a uniform object with a symmetric mass distribution?
Cevap
At its geometric center of symmetry. Symmetry lets opposite mass elements balance without a detailed sum.
Kart 82
Soru
How are speed, period, and frequency related in uniform circular motion?
Cevap
v = 2πr/T = 2πrf, with T = 1/f. One cycle covers one circumference.
Kart 83
Soru
Why is an object apparently weightless in free fall?
Cevap
Its support force is zero while it and its surroundings accelerate together under gravity. Gravity still acts.
Kart 84
Soru
Can forces balance along one axis while an object accelerates along another?
Cevap
Yes. Zero net force in one component gives zero acceleration only in that direction; another component can remain unbalanced.
Kart 85
Soru
Why don't Newton's third-law forces cancel on one object's free-body diagram?
Cevap
Only one force in the pair acts on that object. The partner force belongs on the other object's diagram.
Kart 86
Soru
On a frictionless banked curve, which force components create vertical balance and inward acceleration?
Cevap
The normal force's vertical component balances weight, while its horizontal component supplies the inward net force.
Kart 87
Soru
What motion results when the net force on an object is zero in an inertial frame?
Cevap
Constant velocity. Rest is the special case with constant velocity equal to zero.
Kart 88
Soru
A 3 kg cart has a net horizontal force of 12 N. What is its acceleration?
Cevap
4 m/s². Use a = ΣF/m = 12/3.
Kart 89
Soru
What does the observed equivalence of inertial and gravitational mass imply for free fall?
Cevap
Free-fall acceleration is independent of the falling object's mass. Inertial and gravitational mass are proportional and conventionally assigned equal numerical values.
Kart 90
Soru
Does friction in the simple dry-friction model depend on apparent contact area?
Cevap
No. For a fixed normal force and the same contacting materials, the model treats friction magnitude as independent of apparent contact area.
Kart 91
Soru
When should Hooke's-law predictions be treated cautiously?
Cevap
When deformation leaves the spring's linear elastic range. Force may no longer be proportional to displacement.
Kart 92
Soru
What bank angle θ supports speed v on an ideal frictionless curve of radius r?
Cevap
tan θ = v²/(rg). The result assumes no vertical acceleration and no friction.
Kart 93
Soru
Why do internal forces cancel when finding the net force on a complete system?
Cevap
They occur in equal-and-opposite pairs between system parts. Each pair sums to zero in the system's force total.
Kart 94
Soru
An elevator moves downward at constant speed. How does the scale reading compare with weight?
Cevap
It equals the weight. Constant velocity means zero acceleration and N - mg = 0.
Kart 95
Soru
What assumptions let an ideal pulley redirect a string without changing its tension magnitude?
Cevap
The pulley is massless and frictionless, and the string is ideal. It changes the tension's direction while the magnitude stays the same on both sides.
Kart 96
Soru
What does inertia describe?
Cevap
An object's resistance to changes in velocity. Mass measures translational inertia.
Kart 97
Soru
For the same fixed-mass object or system across all measurements, what does the slope of a net-force-versus-acceleration graph represent?
Cevap
Its mass. Written as ΣF = ma, the graph has slope m when the object or system and its mass stay fixed.
Kart 98
Soru
Does zero net force mean no forces act?
Cevap
No. Several forces can act and cancel vectorially.
Kart 99
Soru
What is the common model for kinetic-friction magnitude?
Cevap
f_k = μ_kN. It applies while the surfaces slide under the model's assumptions.
Kart 100
Soru
How could hanging masses measure the spring constant of one ideal spring?
Cevap
At static equilibrium, record the spring's extension for several known weights and graph mg versus extension. Keep the same spring in its linear range; the slope is k.
Kart 101
Soru
For the same object at the same circular radius, how does required inward net force change if speed doubles?
Cevap
It becomes four times as large. F_in = mv²/r depends on speed squared.
Kart 102
Soru
Where is the center of mass of two point masses on an x-axis?
Cevap
At x_cm = (m₁x₁ + m₂x₂)/(m₁ + m₂). It lies closer to the larger mass.
Kart 103
Soru
Why must net force, rather than one selected force, be used in ΣF = ma?
Cevap
All external forces contribute to acceleration. Ignoring a force changes the vector sum and the prediction.
Kart 104
Soru
Why can tension vary along a hanging chain with nonnegligible mass?
Cevap
Higher sections must support and accelerate more chain below them. Newton's third law still applies locally to each interaction; it does not make tension uniform everywhere.
Kart 105
Soru
What makes a reference frame inertial?
Cevap
An object with zero net force has constant velocity in that frame. A frame accelerating relative to an inertial frame is noninertial.
Kart 106
Soru
How could carts test the proportionality between acceleration and net force?
Cevap
Keep total mass constant, vary the applied net force, and graph acceleration versus force. A line through the origin supports a ∝ ΣF.
Kart 107
Soru
How does Kepler's third-law scaling compare two satellites in circular orbits at center-to-center radii r when their masses are negligible relative to the same fixed central mass?
Cevap
T² ∝ r³. The circular orbit with the larger center-to-center radius has the longer period.
Kart 108
Soru
Which direction does kinetic friction act?
Cevap
Opposite the relative sliding of the contacting surfaces. It is not automatically opposite the object's velocity in every frame.
Kart 109
Soru
What does the slope of a spring-force-versus-displacement graph give?
Cevap
-k when signed force is graphed against signed displacement. The slope magnitude is the spring constant.
Kart 110
Soru
What is the minimum speed at the top of an ideal vertical loop of radius r when gravity alone supplies the inward force?
Cevap
v_min = √(gr). At the threshold, the support force or tension is zero.
Kart 111
Soru
What is translational kinetic energy?
Cevap
Energy associated with an object's translational motion. For a point-like object, K = ½mv².
Kart 112
Soru
How is work by a constant force calculated when its point of application undergoes a straight displacement?
Cevap
W = Fd cos θ. Here d is the displacement of the force's point of application, and θ is the angle between the force and that displacement.
Kart 113
Soru
What does power measure?
Cevap
The rate of energy transfer or conversion. P_avg = ΔE_transferred/Δt; when work is the relevant transfer, P_avg = W/Δt.
Kart 114
Soru
What does conservation of energy say for an isolated system?
Cevap
The system's total energy stays constant. Energy may change form or move among system parts, but it is not created or destroyed.
Kart 115
Soru
Can translational kinetic energy be negative?
Cevap
No. Mass is positive and speed is squared, so translational kinetic energy is zero or positive.
Kart 116
Soru
What does negative work by a force mean?
Cevap
The force makes a negative contribution to the system's kinetic-energy change. Its component opposes the displacement of its point of application; potential energy may rise while total mechanical energy stays constant.
Kart 117
Soru
What is the near-surface change in gravitational potential energy?
Cevap
ΔU_g = mgΔy. It applies when g can be treated as constant.
Kart 118
Soru
When is a chosen system's mechanical energy K + U conserved?
Cevap
When no net energy crosses the system boundary and no internal process converts energy in either direction between mechanical and nonmechanical forms. If either condition fails, K + U can change even though total energy still balances for the system plus surroundings.
Kart 119
Soru
What is the SI unit of power?
Cevap
The watt, W. One watt equals one joule per second.
Kart 120
Soru
For an object modeled as a particle, what connects net work by all forces to its change in translational kinetic energy?
Cevap
The work–energy theorem: W_net = ΔK. Under the particle model, positive net work raises translational kinetic energy and negative net work lowers it. A rotating rigid system requires total kinetic energy and work at the forces' points of application.
Kart 121
Soru
A ball falls from rest through height h near a planet's surface. For the ball–planet system, g is constant and air resistance is negligible. What speed does energy conservation predict?
Cevap
v = √(2gh). The system's mgh decrease in gravitational potential energy becomes ½mv².
Kart 122
Soru
Does choosing a different zero level for potential energy change physical predictions?
Cevap
No. Only potential-energy differences enter measurable energy changes.
Kart 123
Soru
Can an engine do the same work with different average power?
Cevap
Yes. Doing the same work in less time requires greater average power.
Kart 124
Soru
When does a constant nonzero force do zero work over an interval?
Cevap
When its point of application has zero displacement or its displacement is perpendicular to the force. Then W = Fd cos θ is zero.
Kart 125
Soru
A particle-modeled block slides down a fixed frictionless track. Does the path shape affect its final speed at a given lower height?
Cevap
No. With only gravity doing work, the potential-energy change depends on height, not path.
Kart 126
Soru
How does translational kinetic energy change if speed doubles at constant mass?
Cevap
It becomes four times as large. Kinetic energy depends on v².
Kart 127
Soru
What is the elastic potential energy of an ideal spring displaced by a signed amount x from its relaxed or natural length, with U_s = 0 there?
Cevap
U_s = ½kx². Choosing zero energy at the relaxed length gives the same stored energy for equal-magnitude extension or compression.
Kart 128
Soru
What does signed area under a force-component-versus-position graph represent when position tracks that force's point of application?
Cevap
Work done by that force along the measured coordinate. Area below the position axis counts as negative work under the graph's sign convention.
Kart 129
Soru
A chosen system starts with 20 J of mechanical energy and converts 6 J of it into thermal energy, with no energy crossing the boundary. How much mechanical energy remains?
Cevap
14 J. The 6 J thermal-energy increase matches the mechanical-energy decrease.
Kart 130
Soru
What shape does a translational-kinetic-energy-versus-speed graph have for fixed mass?
Cevap
The right-hand half of an upward-opening parabola through the origin. Speed is nonnegative, and K is proportional to v², not v.
Kart 131
Soru
A machine transfers 600 J in 3 s. What is its average power?
Cevap
200 W. Divide energy transferred by elapsed time.
Kart 132
Soru
Why does the normal force do no work on a nonrotating block sliding across a fixed horizontal floor?
Cevap
The force is perpendicular to the horizontal displacement of its points of application. Their dot product is zero in this pure-translation model.
Kart 133
Soru
A coaster modeled as a particle moves on a fixed frictionless track. Where is its speed greatest?
Cevap
At the lowest accessible position. Gravitational potential energy is smallest there, so kinetic energy is largest.
Kart 134
Soru
Two objects have equal mass and velocities of equal magnitude but opposite direction. How do their translational kinetic energies compare?
Cevap
They are equal. Kinetic energy uses speed and has no direction.
Kart 135
Soru
What makes work by a conservative force path independent?
Cevap
It depends only on the initial and final configurations. Any two paths between the same endpoints give the same conservative-force work.
Kart 136
Soru
A 10 N force acts while its point of application moves 3 m in the force direction. How much work does the force do?
Cevap
30 J. Here θ = 0, so W = Fd = 10×3.
Kart 137
Soru
How is total potential energy built for a system with several interacting pairs?
Cevap
Add the potential energy assigned to each relevant pair. Count each interaction pair once and use one consistent reference choice.
Kart 138
Soru
How should external work appear in an energy equation?
Cevap
As energy transferred across the system boundary. A useful form is ΔE_system = W_external + other transfers.
Kart 139
Soru
How does a spring launch problem combine energy forms?
Cevap
Initial elastic energy becomes kinetic energy and possibly gravitational or thermal energy. Write only the forms present in the chosen initial and final states.
Kart 140
Soru
For a constant force parallel to the velocity of its point of application, how is instantaneous mechanical power calculated?
Cevap
P = Fv. More generally, P = F·v_point, so only the force component along that point's velocity contributes.
Kart 141
Soru
How does translational kinetic energy change if mass triples at constant speed?
Cevap
It triples. Kinetic energy is directly proportional to mass.
Kart 142
Soru
How much net work does a conservative force do around a path that returns to the initial configuration?
Cevap
Zero. The initial and final potential energies are the same.
Kart 143
Soru
Where is stable equilibrium on a potential-energy-versus-position graph?
Cevap
At a local minimum. Small displacements produce forces that point back toward the minimum.
Kart 144
Soru
Which displacement belongs in the work done by a force on a rigid object?
Cevap
The displacement of that force's point of application. Using the center-of-mass displacement can be wrong when the object also rotates.
Kart 145
Soru
What happens to mechanical energy when kinetic friction acts inside the chosen system?
Cevap
Some mechanical energy becomes thermal energy. The broader system's total energy still balances.
Kart 146
Soru
A nonrotating particle falls from rest through vertical drop h under constant g. If its gravitational-potential decrease becomes only translational kinetic energy, with no other energy changes, what graph linearizes final speed?
Cevap
Graph v² versus drop height h. Under those conditions, v² = 2gh, so the slope should be 2g.
Kart 147
Soru
If two students start and finish a stair climb at the same speeds, how could data compare their average mechanical output power against gravity?
Cevap
Measure each student's mass, vertical rise, and climb time, then calculate mgh/t. Equal initial and final speeds make ΔK = 0; if ΔK is negligible, the result is an approximation. This is mechanical output power against gravity, not metabolic input power.
Kart 148
Soru
How can force-sensor data measure work when force changes as its point of application moves?
Cevap
Graph the force component along the motion against the point-of-application position and find the signed area. A rectangle formula isn't enough for a varying force.
Kart 149
Soru
Why is potential energy assigned to a system rather than one isolated object?
Cevap
It belongs to an interaction between system parts. Gravitational potential energy, for example, belongs to the object–Earth system.
Kart 150
Soru
How can work by a nonconservative force depend on path?
Cevap
Different routes can have different force histories or path lengths. Kinetic-friction work, for example, can change with distance traveled.
Kart 151
Soru
A 2 kg cart moves at 3 m/s. What is its translational kinetic energy?
Cevap
9 J. K = ½(2)(3²) = 9 J.
Kart 152
Soru
A block slides distance d across a stationary surface while constant kinetic friction f_k opposes its displacement. What work does friction do on the block?
Cevap
W_f = -f_k d. The negative sign follows from friction pointing opposite the block's displacement in this stated setup.
Kart 153
Soru
A 2 kg object rises 5 m where g = 10 m/s². What is ΔU_g?
Cevap
+100 J. ΔU_g = mgΔy = 2 × 10 × 5.
Kart 154
Soru
Why are energy bar charts useful?
Cevap
They make initial energy, final energy, and transfers explicit. A correct chart respects the chosen system and reference levels.
Kart 155
Soru
A motor lifts the same load through the same height twice as fast. Both lifts begin and end at the same speeds and have equal or negligible dissipative losses. How do the motor's mechanical output work and average power compare?
Cevap
The mechanical output work is unchanged, while average power doubles. The two lifts have the same ΔU_g, the same ΔK, and the same losses, so the same output energy is delivered in half the time.
Kart 156
Soru
A nonrotating 1 kg block starts from rest and receives 18 J of net work. What speed does it reach?
Cevap
6 m/s. For this pure-translation model, ΔK = 18 J = ½(1)v².
Kart 157
Soru
Why is gravitational potential energy lower when two attracting point masses—or nonoverlapping spherical bodies—are closer in the inverse-square model?
Cevap
Energy must be supplied to separate them. With zero chosen at infinite center-to-center separation, U_g = -GMm/r.
Kart 158
Soru
What does a steep potential-energy graph imply about force magnitude in one dimension?
Cevap
A large force magnitude. Force points toward decreasing potential energy and corresponds to the negative slope of U(x).
Kart 159
Soru
An ideal spring with k = 80 N/m is compressed 0.50 m from its relaxed length. With U_s = 0 at that length, what elastic energy is stored?
Cevap
10 J. U_s = ½(80)(0.50²).
Kart 160
Soru
A constant 50 N force acts while its point of application moves at 4 m/s in the force direction. What mechanical power is delivered?
Cevap
200 W. P = Fv_point = 50 × 4.
Kart 161
Soru
If potential energy decreases by 30 J and no energy crosses the system boundary, what happens to the other energy forms?
Cevap
They increase by a total of 30 J. Often kinetic energy rises, but thermal or other forms may share the increase.
Kart 162
Soru
Does an object's translational kinetic energy depend on the reference frame?
Cevap
Yes. Different inertial observers can measure different speeds and therefore different K = ½mv² for the same object.
Kart 163
Soru
Why can work depend on the system boundary?
Cevap
Changing the system can reclassify energy transfer. For example, friction may be external work on one system but internal thermal-energy conversion in a larger system.
Kart 164
Soru
A force-component-versus-position graph for the force's point of application forms a triangle of base 4 m and height 6 N above the axis. What work does it show?
Cevap
12 J. The signed area is ½×4×6.
Kart 165
Soru
A motor transfers 50 J into a chosen system while another device transfers 12 J out. What is the net system-energy change?
Cevap
+38 J. Add the signed transfers across the boundary: 50 J - 12 J.
Kart 166
Soru
What is the clearest first step in an energy-conservation problem?
Cevap
Choose the system and the initial and final states. That choice determines which energies and transfers belong in the equation.
Kart 167
Soru
Why can energy methods solve some problems without finding time?
Cevap
Energy connects states through position, speed, and transfers. Time is absent unless power or a time-dependent process matters.
Kart 168
Soru
Why can a force's instantaneous mechanical power be zero while the force is nonzero?
Cevap
Its point of application may be instantaneously at rest, or the force may be perpendicular to that point's velocity. In either case F·v_point = 0.
Kart 169
Soru
What is the SI unit of kinetic energy?
Cevap
The joule, J. One joule equals 1 kg·m²/s².
Kart 170
Soru
How is work by a conservative force related to potential-energy change?
Cevap
W_conservative = -ΔU. When the conservative force does positive work, potential energy falls.
Kart 171
Soru
Where is unstable equilibrium on a potential-energy-versus-position graph?
Cevap
At a local maximum. A small displacement produces a force that pushes the system farther away.
Kart 172
Soru
For a particle moving in a circle at constant speed, does the inward net force change its translational kinetic energy?
Cevap
No. The inward net force is perpendicular to the particle's instantaneous velocity, so its net work is zero and it changes the velocity's direction rather than its magnitude.
Kart 173
Soru
Why should thermal energy not be written as a force?
Cevap
Thermal energy is an energy store, not an interaction force. Friction is the interaction that converts or transfers energy.
Kart 174
Soru
How could a ramp experiment test mechanical-energy conservation for a cart–Earth system when the cart is modeled as a particle?
Cevap
Measure speed and height at several points, calculate K + U_g with one consistent zero level, and compare within uncertainty. Systematic drift suggests unmodeled energy transfer or conversion.
Kart 175
Soru
According to the plotted power's definition and sign convention, what does signed area under a power-versus-time graph represent?
Cevap
Energy transferred or converted over the interval. Interpret positive and negative areas using the graph's stated sign convention and what its power represents.
Kart 176
Soru
What is linear momentum?
Cevap
p = mv. Momentum is a vector in the direction of velocity and uses SI units kg·m/s.
Kart 177
Soru
How is a multi-object system's total momentum found?
Cevap
Add every object's momentum as a vector. In one dimension, add signed values.
Kart 178
Soru
For a chosen object or system, what is external impulse?
Cevap
The change in its momentum: J_external = Δp. For constant net external force, J_external = F_net,external Δt.
Kart 179
Soru
What experimental uncertainty matters strongly when comparing collision kinetic energies?
Cevap
Velocity uncertainty. Because K depends on v², small speed errors can produce larger relative energy errors.
Kart 180
Soru
Why can two objects bounce apart yet still collide inelastically?
Cevap
Bouncing does not guarantee kinetic-energy conservation. Some kinetic energy becomes internal or thermal energy through deformation, and some may be carried by sound.
Kart 181
Soru
A 3 kg cart moves right at 4 m/s. What is its momentum if right is positive?
Cevap
+12 kg·m/s. p = mv = 3 × 4.
Kart 182
Soru
Why can momentum be negative while kinetic energy cannot?
Cevap
Momentum carries direction through velocity's sign. Kinetic energy depends on speed squared.
Kart 183
Soru
When is a system's total linear momentum conserved?
Cevap
When the net external impulse is zero or negligible during the interval. Internal impulses cancel in the system total.
Kart 184
Soru
Two equal masses collide elastically in one dimension; one is initially at rest. What commonly happens?
Cevap
They exchange velocities. The incoming mass stops and the other leaves with its speed under the ideal conditions.
Kart 185
Soru
Can total kinetic energy increase in an explosion?
Cevap
Yes. Stored internal energy can become kinetic energy. Total momentum is conserved for a defined system with zero or negligible net external impulse, while total energy remains conserved for the system plus surroundings.
Kart 186
Soru
How is total momentum related to center-of-mass velocity?
Cevap
p_total = Mv_cm. M is the system's total mass.
Kart 187
Soru
How does a nonzero external impulse affect system momentum?
Cevap
It changes total momentum by that impulse. J_external = Δp_system.
Kart 188
Soru
Two carts start at rest and push apart with negligible external horizontal impulse. How do their final momenta compare?
Cevap
They are equal in magnitude and opposite in direction. The system began with zero total momentum.
Kart 189
Soru
What are equivalent SI units for impulse?
Cevap
N·s and kg·m/s. Both represent a change in momentum.
Kart 190
Soru
What defines an elastic collision?
Cevap
Both total momentum and total kinetic energy are conserved for the chosen isolated system. Individual objects may exchange both quantities.
Kart 191
Soru
How can a force sensor and motion detector test the impulse–momentum theorem for one cart?
Cevap
Account for every external force component along the measured axis, compare the net-force–time area with m(v_f - v_i), and include uncertainty. Agreement supports J_external = Δp.
Kart 192
Soru
A person jumps right from a stationary boat. Neglecting external horizontal impulse, which way does the boat move?
Cevap
Left. The person and boat acquire opposite momenta so total momentum remains zero.
Kart 193
Soru
Why must momentum signs be kept through an impulse calculation?
Cevap
Impulse changes a vector quantity. Reversal can make Δp larger than either momentum magnitude alone.
Kart 194
Soru
What defines a perfectly inelastic collision?
Cevap
The objects stick together after impact. Momentum is conserved in an isolated system, but kinetic energy decreases as much as the constraints allow.
Kart 195
Soru
Why can momentum be conserved during a collision even when large forces act?
Cevap
For a defined system with zero or negligible net external impulse, the large collision forces are internal. Their equal-and-opposite impulses cancel within that system.
Kart 196
Soru
Two objects have equal speed. Which has the larger momentum magnitude?
Cevap
The object with larger mass. At equal speed, momentum is proportional to mass.
Kart 197
Soru
How is momentum conservation written for a two-dimensional isolated interaction?
Cevap
Conserve components separately: Σp_x,i = Σp_x,f and Σp_y,i = Σp_y,f. Both component equations must hold for the same interaction.
Kart 198
Soru
For a chosen object or system, how is average net external force related to impulse?
Cevap
F_avg,external = Δp/Δt. For the same momentum change, a longer interaction time gives a smaller average force.
Kart 199
Soru
Which conservation law alone can determine the shared final velocity of a sticking collision?
Cevap
Linear momentum conservation, if external impulse is negligible. Kinetic energy is not conserved in the sticking process.
Kart 200
Soru
Two equal momentum vectors point along +x and +y. What direction does their total momentum point?
Cevap
At 45° between the positive axes. Equal perpendicular components produce that resultant direction.
400 kart
AP Physics 1 Flashcards: Complete 8-Unit Course Review
Bu desteyle ücretsiz çalış
Nibomo açılır ve hemen çalışmaya başlayabilirsiniz.
Kart 201
Soru
If external impulse during a collision is small but not zero, what should experimental data show?
Cevap
Final total momentum should be close to, but not exactly equal to, initial total momentum. The difference estimates external impulse.
Kart 202
Soru
A force–time pulse has the same area but twice the peak force and half the duration. How does its impulse change?
Cevap
It does not change. Impulse depends on total signed area, not peak force alone.
Kart 203
Soru
A 1 kg cart at 4 m/s sticks to an identical stationary cart. If external impulse is negligible, how does final kinetic energy compare with the initial 8 J?
Cevap
It is 4 J, half the initial value. The 4 J decrease in translational kinetic energy becomes internal or thermal energy through deformation, and some energy may be carried by sound.
Kart 204
Soru
How can a nearly frictionless cart track improve a momentum-conservation test?
Cevap
It reduces external horizontal impulse during the collision. That makes the two-cart system closer to isolated.
Kart 205
Soru
How does an object's momentum change if its speed doubles at constant mass?
Cevap
Its momentum magnitude doubles. Momentum depends linearly on speed.
Kart 206
Soru
For a chosen object or system, what does signed area under its net-external-force-versus-time graph represent?
Cevap
External impulse, which equals the change in that object's or system's momentum. Area below the time axis contributes negative impulse under the graph's sign convention.
Kart 207
Soru
A firework at rest explodes into two pieces with negligible external impulse. If one piece has twice the mass, how do the piece speeds compare?
Cevap
The heavier piece moves at half the speed of the lighter piece. Their momentum magnitudes must match.
Kart 208
Soru
Why is sticking evidence of an inelastic collision?
Cevap
The objects share one final velocity, while some translational kinetic energy becomes internal or thermal energy through deformation. Translational kinetic energy is not conserved.
Kart 209
Soru
Can a moving two-object system have zero total momentum?
Cevap
Yes. Equal and opposite momenta cancel even though each object is moving.
Kart 210
Soru
A constant 6 N net external force acts on a chosen object for 0.5 s. What impulse does it deliver?
Cevap
3 N·s in the force direction. Multiply the net external force by the interaction time.
Kart 211
Soru
What does a momentum-versus-velocity graph's slope represent for one object?
Cevap
Its mass. The relationship p = mv is linear through the origin.
Kart 212
Soru
A 2 kg cart at +3 m/s sticks to a 1 kg cart at rest. If external horizontal impulse is negligible, what is their final velocity?
Cevap
+2 m/s. Momentum conservation gives (2×3 + 1×0)/(2+1).
Kart 213
Soru
An isolated two-dimensional interaction has known initial total momentum p_total,i and known first outgoing momentum p₁,f. How is the second outgoing momentum found?
Cevap
Subtract component by component: p₂,f = p_total,i - p₁,f. Thus p₂x,f = p_total,x,i - p₁x,f, with the same subtraction for y.
Kart 214
Soru
A 2 kg ball changes velocity from +3 m/s to -1 m/s. What impulse acts on it?
Cevap
-8 N·s. Δp = m(v_f - v_i) = 2(-1 - 3).
Kart 215
Soru
What remains conserved in an isolated inelastic collision?
Cevap
Total momentum. Some kinetic energy becomes internal or thermal energy through deformation, and some may be carried by sound.
Kart 216
Soru
Why does choosing both colliding objects as the system simplify momentum analysis?
Cevap
Their contact forces become internal. Only external impulse can change the system total.
Kart 217
Soru
For a chosen object or system, what does the slope of its momentum-versus-time graph represent?
Cevap
Net external force. A steeper slope means a larger force in the slope's signed direction.
Kart 218
Soru
Why do airbags reduce injury force during a stop?
Cevap
They increase the stopping time for roughly the same momentum change. That lowers the average force.
Kart 219
Soru
A 1 kg cart at 4 m/s sticks to an identical stationary cart. If external impulse is negligible, what final speed do they share?
Cevap
2 m/s. Momentum 4 kg·m/s is shared by 2 kg.
Kart 220
Soru
For a defined collision system with zero or negligible net external impulse, how can before-and-after velocity measurements classify the collision?
Cevap
First verify total momentum within uncertainty, then compare total kinetic energy. Unchanged kinetic energy supports elastic behavior; any change beyond uncertainty means the collision isn't elastic, with a decrease indicating an ordinary inelastic collision.
Kart 221
Soru
What is angular displacement?
Cevap
The signed angle through which a rigid body rotates. In calculations, radians make the linear–angular relationships direct.
Kart 222
Soru
For a rigid body rotating about a chosen fixed axis, what does angular velocity measure?
Cevap
Signed angular displacement per time about that axis. Average angular velocity is ω_avg = Δθ/Δt under one sign convention.
Kart 223
Soru
For a rigid body rotating about a chosen fixed axis, what does angular acceleration measure?
Cevap
Change in signed angular velocity per time about that axis. Average angular acceleration is α_avg = Δω/Δt.
Kart 224
Soru
What does rotational inertia measure?
Cevap
Resistance to angular acceleration about a specified axis. It depends on mass and how that mass is distributed relative to the axis.
Kart 225
Soru
What is the lever arm in a torque calculation?
Cevap
The perpendicular distance from the axis to the force's line of action. It is not always the full distance to the contact point.
Kart 226
Soru
For a planar rigid object in an inertial frame, what two conditions give simultaneous translational and rotational equilibrium?
Cevap
ΣF_external = 0 and Στ_external = 0 about a fixed axis. Static equilibrium also requires the object to be at rest.
Kart 227
Soru
Two points lie on the same rotating rigid disk. Which rotational quantities are the same?
Cevap
They share angular displacement, angular velocity, and angular acceleration. Their linear speeds and accelerations can differ with radius.
Kart 228
Soru
How is rotational inertia found for a collection of point masses?
Cevap
I_total = Σmᵢrᵢ². Each rᵢ is that mass's perpendicular distance from the chosen axis.
Kart 229
Soru
What determines the magnitude of torque from one force about a chosen axis?
Cevap
τ = rF sin θ = r_perp F. The radius vector r runs from the axis to the force's point of application, θ is the angle between r and the force, and r_perp is the lever arm.
Kart 230
Soru
What is Newton's second law for a rigid system rotating about an axis fixed in an inertial frame?
Cevap
Στ_external = Iα when rotational inertia I about that axis is constant. Net external torque and angular acceleration use the same signed-axis convention.
Kart 231
Soru
For a point on a rigid body rotating about a fixed axis, how is signed arc displacement related to signed angular displacement in radians?
Cevap
Δs = rΔθ. Here r is the point's perpendicular distance from the fixed axis, and both displacements use matching sign conventions along the circular path.
Kart 232
Soru
In a planar rigid-body model, can an object with zero net external force and zero net external torque about its center of mass be moving?
Cevap
Yes. Its center of mass may translate at constant velocity while it rotates at constant angular velocity; the stated zero net force and center-of-mass torque don't require rest.
Kart 233
Soru
At an instant when ω ≠ 0, what do the signs of angular velocity and angular acceleration show about rotational speed?
Cevap
Matching signs mean the rotation speeds up; opposite signs mean it slows down. The sign convention chooses which rotation direction is positive.
Kart 234
Soru
How are clockwise and counterclockwise torques combined?
Cevap
Choose one direction as positive and add signed torques. Net torque is the algebraic sum about the same axis.
Kart 235
Soru
For the same rigid system with constant rotational inertia about the same axis fixed in an inertial frame, what happens if net-external-torque magnitude doubles?
Cevap
Angular-acceleration magnitude doubles. Under those conditions, |α| is directly proportional to |Στ_external|.
Kart 236
Soru
Why must an axis be named when stating rotational inertia?
Cevap
The same object has different rotational inertia about different axes. Mass distribution relative to the chosen axis changes.
Kart 237
Soru
For one rigid body rotating about a fixed axis, what does the slope of its angular-position-versus-time graph represent?
Cevap
Signed angular velocity about that axis. A constant slope means constant angular velocity under the graph's sign convention.
Kart 238
Soru
Why is torque's unit N·m not called a joule?
Cevap
Torque and energy are different physical quantities despite matching unit dimensions. Torque describes rotational effectiveness of a force.
Kart 239
Soru
A rigid wheel has constant I = 2 kg·m² about an axis fixed in an inertial frame and net external torque 8 N·m about that axis. What is its angular-acceleration magnitude?
Cevap
4 rad/s². |α| = |Στ_external|/I = 8/2.
Kart 240
Soru
Where can the weight of a rigid object be treated as acting in a uniform gravitational field?
Cevap
At the object's center of mass. That single force gives the same net gravitational force and torque.
Kart 241
Soru
For a point on a rigid body rotating about a fixed axis, how is tangential-speed magnitude related to angular velocity?
Cevap
v_t = r|ω|. Here r is the perpendicular distance from the fixed axis. Points farther from the axis move faster even though the rigid body has one angular velocity.
Kart 242
Soru
For constant angular acceleration about one fixed axis, what does ω = ω₀ + αt retrieve?
Cevap
Angular velocity after elapsed time t. Use signed angular quantities about that axis over an interval with constant α.
Kart 243
Soru
A free-body diagram for a rigid bar must support a torque calculation about a marked axis. What must it show besides each force's direction and magnitude?
Cevap
Each force's point of application or line of action relative to the axis. That geometry sets the lever arm and torque sign; omitting it can preserve the net-force picture while losing the net torque.
Kart 244
Soru
For the same rigid system about the same axis fixed in an inertial frame, what does the slope of a net-external-torque-versus-angular-acceleration graph represent?
Cevap
Its constant rotational inertia I about that axis. The graph follows Στ_external = Iα.
Kart 245
Soru
A thin hoop and solid disk have the same mass and radius and rotate about their central symmetry axes. With I_hoop = MR² and I_disk = ½MR², which has larger I?
Cevap
The hoop. More of its mass lies far from the axis.
Kart 246
Soru
Why can a rigid object have zero net external force but nonzero net external torque?
Cevap
External forces can cancel as vectors while acting along different lines. The resulting couple can still change the object's rotation.
Kart 247
Soru
Which constant-angular-acceleration equation connects angular velocity and angular displacement about one fixed axis without time?
Cevap
ω² = ω₀² + 2αΔθ. Use signed quantities about that axis over an interval with constant α.
Kart 248
Soru
A 10 N perpendicular force acts 0.40 m from a pivot. What torque magnitude does it produce?
Cevap
4 N·m. τ = rF for a perpendicular force.
Kart 249
Soru
For a rigid body rotating about a fixed axis, how is the signed tangential-acceleration component related to angular acceleration?
Cevap
For a positive tangent consistent with the angular sign convention, a_t = rα. Its alignment or opposition with velocity determines whether speed increases or decreases.
Kart 250
Soru
Why can two equal-mass rigid wheels have different angular-acceleration magnitudes under equal net-external-torque magnitudes about comparable axes fixed in an inertial frame?
Cevap
Their rotational inertias about those axes can differ because their mass distributions differ. Mass alone doesn't set rotational response.
Kart 251
Soru
For one rigid body rotating about a fixed axis, what does signed area under its angular-velocity-versus-time graph represent?
Cevap
Signed angular displacement about that axis. Area below the time axis contributes negative angular displacement under the graph's sign convention.
Kart 252
Soru
A rigid object rests on a support that is slowly tilted in uniform gravity. If gravity and support contact are its only external interactions, sufficient static friction prevents slipping, and the motion is quasistatic, what marks the onset of tipping?
Cevap
The object's center-of-mass vertical line reaches the edge of its support region. Beyond that point, gravity produces an unbalanced tipping torque.
Kart 253
Soru
A point is twice as far from a rigid wheel's fixed axis as another point. How do their tangential speeds compare?
Cevap
The farther point moves twice as fast. v_t is proportional to radius for their common angular-speed magnitude |ω|.
Kart 254
Soru
Does moving the chosen pivot change an individual force's torque?
Cevap
Yes. Torque depends on the axis, though a correctly solved physical prediction stays consistent.
Kart 255
Soru
How does the parallel-axis theorem relate rotational inertia to a parallel axis a distance d from the center of mass?
Cevap
I = I_cm + Md². Shifting the axis away from the center of mass increases rotational inertia.
Kart 256
Soru
How could an experiment determine a rigid wheel's constant rotational inertia about an axis fixed in an inertial frame?
Cevap
Apply several known signed net external torques about that axis, measure signed angular acceleration, and graph torque versus α. The slope is I.
Kart 257
Soru
For a point at perpendicular distance r > 0 from a rigid body's fixed rotation axis, what is the radial-acceleration magnitude?
Cevap
a_r = v_t²/r = rω². The acceleration points toward the axis. At r = 0, use a_r = rω² = 0; the quotient form isn't defined there.
Kart 258
Soru
How could a meterstick experiment test torque balance?
Cevap
Hang known forces at measured lever arms and compare signed r_perp F values at equilibrium. Repeat with different pivot choices.
Kart 259
Soru
For uniform rotation at frequency f, what is the angular-speed magnitude?
Cevap
|ω| = 2πf. One revolution is 2π rad, and uniform rotation has the same angular-speed magnitude throughout the cycle.
Kart 260
Soru
Why is choosing the pivot at an unknown support force often useful?
Cevap
That force then has zero lever arm and drops out of the torque equation. The physical equilibrium does not depend on the calculation shortcut.
Kart 261
Soru
Among parallel axes through or near a rigid object, which gives the minimum rotational inertia?
Cevap
The parallel axis through the center of mass. Any offset adds the positive term Md².
Kart 262
Soru
Compare rigid systems with constant rotational inertia about comparable axes fixed in an inertial frame. If net external torque is the same but I triples, what happens to angular acceleration?
Cevap
It becomes one-third as large. For each stated system, α = Στ_external/I.
Kart 263
Soru
A rigid wheel of radius 0.50 m has angular-speed magnitude 6 rad/s about its fixed axis. What is the rim speed?
Cevap
3 m/s. v_t = r|ω| = 0.50 × 6.
Kart 264
Soru
A 30 N child sits 2 m left of a seesaw pivot. If the seesaw's own weight acts through the pivot, where should a 20 N child sit on the right for balance?
Cevap
3 m from the pivot. Balance torque magnitudes: 30×2 = 20×r.
Kart 265
Soru
For constant angular acceleration about one fixed axis, what does Δθ = ω₀t + ½αt² retrieve?
Cevap
Angular displacement over elapsed time t. Use signed angular quantities about that axis; the equation combines the initial angular-velocity contribution with the change caused by constant α.
Kart 266
Soru
A 20 N force acts at 30° to a radius vector of magnitude 0.60 m from a chosen axis. What torque magnitude results?
Cevap
6 N·m. |τ| = rF sin θ = 0.60 × 20 × sin 30°.
Kart 267
Soru
How does moving mass farther from a rotation axis affect rotational inertia?
Cevap
It increases rotational inertia strongly. For a point mass, I = mr².
Kart 268
Soru
How can angular-acceleration data compare two rigid objects' constant rotational inertias about comparable axes fixed in an inertial frame?
Cevap
Apply the same measured net-external-torque magnitude about each axis and compare |α|. The object with smaller angular-acceleration magnitude has larger I.
Kart 269
Soru
Why must angular displacement be in radians for Δs = rΔθ?
Cevap
Radians define angle as arc length divided by radius. Degree measure would require a conversion factor.
Kart 270
Soru
When does a nonzero force produce zero torque about an axis?
Cevap
When its line of action passes through the axis. The lever arm is then zero.
Kart 271
Soru
What is angular momentum for a rigid object rotating about an axis fixed in an inertial frame?
Cevap
L = Iω about that axis. Use one signed-axis convention consistently for L and ω.
Kart 272
Soru
What magnitude relation holds for a planar, constant-radius rigid object whose center of mass lies on its rolling axis when it rolls without slipping on a stationary surface?
Cevap
v_cm = R|ω|. Here R is the constant rolling radius; the contact point is instantaneously at rest relative to the surface.
Kart 273
Soru
For a rigid system rotating about an axis fixed in an inertial frame, how is work by a constant torque about that axis related to angular displacement?
Cevap
W = τΔθ when torque and angular displacement use the same signed axis. The angle must be in radians.
Kart 274
Soru
For point masses—or nonoverlapping spherical bodies—M and m separated center to center by r, what is gravitational potential energy with zero at infinity?
Cevap
U_g = -GMm/r. The negative sign reflects U_g = 0 at infinity and attraction. In an isolated gravity-only inverse-square system, total mechanical energy determines binding: E < 0 is bound, while E ≥ 0 is unbound.
Kart 275
Soru
When is a chosen system's angular momentum about an axis fixed in an inertial frame conserved?
Cevap
When net external torque on the system about that axis is zero or negligible over the interval. Internal torques cannot change the system total.
Kart 276
Soru
What does kinetic friction do to mechanical energy while a wheel slips on a stationary surface?
Cevap
It converts mechanical energy into internal or thermal energy while the surfaces slide. Use qualitative energy accounting here; no no-slip relation connects the magnitudes v_cm and R|ω| during the slip.
Kart 277
Soru
What is the angular-momentum magnitude of a translating point object about a chosen fixed point in an inertial frame?
Cevap
L = mvr sin θ = r_perp mv. Here r points from the chosen point to the object, v is its speed, and θ is the angle between them. The SI unit is kg·m²/s.
Kart 278
Soru
For a satellite of negligible mass relative to a fixed central body, how do speed and energy change along one gravity-only elliptical orbit?
Cevap
Speed and kinetic energy are greatest near the central body, while gravitational potential energy is greatest farther away. Total mechanical energy stays constant.
Kart 279
Soru
What is a rigid body's rotational kinetic energy about a fixed axis?
Cevap
K_rot = ½Iω². It depends on rotational inertia about that axis and angular speed.
Kart 280
Soru
Two planar rigid objects with constant rolling radii and centers of mass on their rolling axes are released from rest on the same fixed incline. Each rolls without slipping under gravity and its contact forces, with no other applied force or torque and negligible dissipation. Which accelerates faster: the one with smaller or larger I_cm/(MR²)?
Cevap
The one with smaller I_cm/(MR²). Here I_cm is rotational inertia about the center of mass, M is total mass, and R is that object's constant rolling radius. Under the stated model, a_cm = g sin θ/(1 + I_cm/(MR²)).
Kart 281
Soru
How could a rotating-platform experiment test angular-momentum conservation about the platform's axis, treated as fixed in the lab's inertial frame?
Cevap
Choose the platform, rider, and moved masses as one system. In both the initial and final arrangements, wait until the rider and moved masses are stationary relative to the platform and the whole system co-rotates with one common signed angular velocity; then measure I_i, ω_i, I_f, and ω_f and compare I_iω_i with I_fω_f. Keep net external torque about the axis negligible, reduce bearing friction, and include uncertainty.
Kart 282
Soru
For a satellite of mass m negligible beside a fixed central mass M, how are K, U_g, and total mechanical energy E related in a gravity-only circular orbit at center-to-center radius r?
Cevap
K = -U_g/2 and E = U_g/2 = -K. Since U_g = -GMm/r, this gives K = GMm/(2r) and E = -GMm/(2r).
Kart 283
Soru
For a rigid system rotating about an axis fixed in an inertial frame, how is instantaneous mechanical power delivered by a torque about that axis related to angular velocity?
Cevap
P = τω for signed torque and angular velocity about the same axis. It is the rotational counterpart of P = F·v_point.
Kart 284
Soru
In a planar common-axis rigid-body model, what kinetic-energy expression applies to a body rolling without slipping, with I_cm and ω taken about the same axis through its center of mass?
Cevap
K = ½Mv_cm² + ½I_cmω². In this model, the rigid body's motion combines center-of-mass translation with rotation about one axis through the center of mass. I_cm and ω must refer to that same axis.
Kart 285
Soru
Does angular-momentum conservation require rotational kinetic-energy conservation?
Cevap
No. Internal work can change rotational kinetic energy while angular momentum stays constant.
Kart 286
Soru
Why do astronauts feel weightless in orbit even though gravity acts on them?
Cevap
They and their spacecraft are in continuous free fall together. Apparent weight is small because support forces are small.
Kart 287
Soru
Two wheels spin at the same angular speed. Which has more rotational kinetic energy?
Cevap
The wheel with larger rotational inertia. At common ω, K_rot is proportional to I.
Kart 288
Soru
For a chosen system, what does the slope of its angular-momentum-versus-time graph about an axis fixed in an inertial frame represent?
Cevap
Net external torque on the system about that axis. A constant slope means constant signed net external torque there.
Kart 289
Soru
A motor supplies 12 N·m of torque about a shaft axis fixed in the lab's inertial frame while the shaft turns in the torque direction at 10 rad/s. What mechanical power does it deliver?
Cevap
120 W. Using signed quantities about the shaft axis, P = τω = 12×10.
Kart 290
Soru
While a rigid wheel is slipping on a stationary surface, how are the magnitudes v_cm and R|ω| related?
Cevap
No no-slip equality applies. Their values evolve separately until friction may bring the contact point to rest relative to the surface.
Kart 291
Soru
A launched object has negligible mass relative to a fixed central mass M and starts at center-to-center radius r. What minimum speed lets it escape under gravity alone without further propulsion or drag?
Cevap
v_escape = √(2GM/r). At that threshold, total mechanical energy is zero with the object reaching infinity at zero speed.
Kart 292
Soru
In a planar common-axis rigid-body model, what kinetic-energy forms can a rigid body have when it translates and rotates about an axis through its center of mass?
Cevap
Both translational and rotational kinetic energy. The total is K = ½Mv_cm² + ½I_cmω², where I_cm and ω refer to the same axis through the center of mass.
Kart 293
Soru
For a chosen object or system, what is angular impulse about an axis fixed in an inertial frame?
Cevap
The change in that object or system's angular momentum about the axis. For constant net external torque, ΔL = τ_net,external Δt. Use the same axis and sign convention throughout. Angular impulse has units N·m·s, equivalent to kg·m²/s.
Kart 294
Soru
Two equal-mass planar rigid objects have constant rolling radii and centers of mass on their rolling axes. They start from rest at the same height and roll without slipping to the same lower endpoint with negligible dissipation. Why can their final speeds differ?
Cevap
Their rotational inertias divide the same decrease in gravitational potential energy differently between translation and rotation. A larger I_cm/(MR²) leaves less energy for translational speed, where I_cm is rotational inertia about the center of mass and R is rolling radius.
Kart 295
Soru
For a satellite of negligible mass relative to a fixed central body, how does angular momentum behave along one gravity-only elliptical orbit?
Cevap
It stays constant because gravity exerts zero torque about the central body. The satellite moves faster when closer and slower when farther away.
Kart 296
Soru
How does rotational kinetic energy change if angular speed doubles at fixed I?
Cevap
It becomes four times as large. Rotational kinetic energy depends on ω².
Kart 297
Soru
Why should external torque be evaluated about the same axis used for angular momentum?
Cevap
Both quantities depend on the chosen axis. Mixing axes breaks the conservation statement.
Kart 298
Soru
For a chosen object or system about an axis fixed in an inertial frame, what does signed area under its net-external-torque-versus-time graph represent?
Cevap
Angular impulse, equal to that object or system's ΔL about the axis. Use the graph's signed-axis convention. The area has units N·m·s, equivalent to kg·m²/s.
Kart 299
Soru
Why can static friction act on a rigid object rolling without slipping on a stationary rigid surface without necessarily dissipating mechanical energy?
Cevap
The contact point is instantaneously at rest relative to the surface, so there is no sliding. Static friction can still supply the torque needed for rolling.
Kart 300
Soru
For a satellite whose mass is negligible beside a fixed central mass M, what is its speed in a gravity-only circular orbit at center-to-center radius r?
Cevap
v = √(GM/r). Gravity supplies the inward net force.
Kart 301
Soru
A chosen system's included mass co-rotates with one common angular velocity before and after a change. If its rotational inertia about an axis fixed in an inertial frame doubles while net external torque about that axis is negligible, what happens to its angular speed?
Cevap
It halves. Because all included mass shares one angular velocity in each state, L = Iω applies. With the same axis and sign convention, angular-momentum conservation gives I_iω_i = I_fω_f.
Kart 302
Soru
For a rigid system rotating about an axis fixed in an inertial frame, what does signed area under its net-external-torque-versus-angular-position graph represent when angle is in radians?
Cevap
Net rotational work, equal to the system's change in rotational kinetic energy. Torque and angular position must use the same signed axis.
Kart 303
Soru
Why can't the rolling condition alone prove that friction points uphill or downhill?
Cevap
Friction direction depends on the tendency to slip and the applied forces or torques. Solve the dynamics instead of guessing from motion.
Kart 304
Soru
A satellite of mass m, negligible beside a fixed central mass M, follows a circular orbit at center-to-center radius r under gravity alone. What is its total mechanical energy?
Cevap
E = -GMm/(2r). A larger circular orbit has greater, less-negative energy even though its speed is lower.
Kart 305
Soru
A spinning student pulls masses closer to an axis fixed in the lab's inertial frame while net external torque about that axis is negligible. Why does angular speed increase?
Cevap
Rotational inertia decreases while angular momentum stays constant. Therefore Iω remains constant by increasing ω.
Kart 306
Soru
What makes simple harmonic motion a special kind of periodic motion?
Cevap
Its restoring force or torque is proportional to displacement and points toward equilibrium. Periodic motion alone does not guarantee this relationship.
Kart 307
Soru
What does the amplitude of an SHM displacement graph represent?
Cevap
The maximum distance from equilibrium. It is nonnegative even though displacement alternates sign.
Kart 308
Soru
How are period and frequency related?
Cevap
T = 1/f. Period is seconds per cycle; frequency is cycles per second, measured in hertz.
Kart 309
Soru
What is the period of a mass m on an ideal spring of constant k when spring mass and damping are negligible?
Cevap
T = 2π√(m/k). The motion must stay in the spring's linear SHM range.
Kart 310
Soru
For one-dimensional SHM, what is the equilibrium position?
Cevap
The position where the restoring force or torque—and therefore acceleration along the SHM coordinate—is zero. A stable equilibrium produces a restoring response after a small displacement.
Kart 311
Soru
How far apart in phase are displacement and velocity in SHM?
Cevap
One-quarter cycle. Velocity reaches an extremum when displacement crosses zero.
Kart 312
Soru
When can a simple pendulum be modeled as SHM?
Cevap
For small angular displacements. Then the restoring torque is approximately proportional to angular displacement.
Kart 313
Soru
An oscillator completes 12 cycles in 6 s. What are its frequency and period?
Cevap
f = 2 Hz and T = 0.5 s. Frequency is cycles per time, and period is its reciprocal.
Kart 314
Soru
For a horizontal ideal spring oscillator, what is potential energy at displacement x from its relaxed equilibrium length when U_s = 0 there?
Cevap
U_s = ½kx². It has the same value at +x and -x.
Kart 315
Soru
At the equilibrium position of SHM, is the oscillator necessarily at rest?
Cevap
No. The restoring force or torque and acceleration along the SHM coordinate are zero there, but speed is usually greatest.
Kart 316
Soru
How does a spring oscillator's period change if k becomes four times as large?
Cevap
The period is halved. T is proportional to 1/√k.
Kart 317
Soru
How are acceleration and displacement related along the SHM coordinate?
Cevap
a = -ω²x, where ω = 2πf is the oscillation's angular frequency. Here ω describes the oscillator's phase rate, not a rigid body's rotational angular velocity. The acceleration component along the SHM coordinate points toward equilibrium.
Kart 318
Soru
For a horizontal ideal spring oscillator with amplitude A, what is total mechanical energy when U_s = 0 at the relaxed equilibrium length?
Cevap
E = ½kA². It stays constant when dissipative effects are negligible.
Kart 319
Soru
In a small-angle pendulum, where are speed and gravitational potential energy greatest?
Cevap
Speed is greatest at the bottom; gravitational potential energy is greatest at the turning points. Energy trades between those forms.
Kart 320
Soru
How can frequency be read from an oscillation-versus-time graph?
Cevap
Measure the time between repeating equivalent points to find T, then use f = 1/T. Adjacent peaks are one period apart.
Kart 321
Soru
Why does an ideal mass–spring oscillator exhibit SHM?
Cevap
Its net restoring force is F_net = -kx, where x is displacement from equilibrium. The force is proportional to displacement and points back toward equilibrium.
Kart 322
Soru
A horizontal ideal spring has k = 50 N/m and amplitude 0.20 m. With U_s = 0 at equilibrium, what is the oscillator's total energy?
Cevap
1 J. E = ½(50)(0.20²).
Kart 323
Soru
At maximum positive displacement in SHM, what are velocity and acceleration?
Cevap
Velocity is zero; acceleration has maximum magnitude toward equilibrium. With positive displacement, acceleration is negative.
Kart 324
Soru
How does a spring oscillator's period change if its mass becomes four times as large?
Cevap
The period doubles. T is proportional to √m.
Kart 325
Soru
Why isn't uniform circular motion itself one-dimensional SHM?
Cevap
The object travels around a circle, not back and forth along one line. Its projection onto a diameter does follow SHM.
Kart 326
Soru
For the same ideal oscillator, how does total SHM energy change if amplitude doubles while k or mω² stays fixed?
Cevap
It becomes four times as large. Under those fixed system parameters, total energy is proportional to A².
Kart 327
Soru
In one-dimensional SHM, what are speed and acceleration along the SHM coordinate at equilibrium?
Cevap
Speed is maximum, while acceleration along the SHM coordinate is zero. The restoring force or torque vanishes there.
Kart 328
Soru
Does changing amplitude change the period of an ideal spring oscillator or small-angle pendulum?
Cevap
No within the ideal SHM model. The period depends on system parameters, not amplitude.
Kart 329
Soru
How is maximum speed related to amplitude and angular frequency in SHM?
Cevap
v_max = ωA. Maximum speed occurs at equilibrium.
Kart 330
Soru
For a horizontal ideal spring oscillator, how can kinetic energy at displacement x from equilibrium be found for amplitude A?
Cevap
K = ½k(A² - x²). Subtract spring potential energy from the constant total.
Kart 331
Soru
How far apart in phase are displacement and acceleration in SHM?
Cevap
Half a cycle, or 180°. When displacement is nonzero, acceleration has the opposite sign; at equilibrium, both are zero.
Kart 332
Soru
What is the period of a small-angle simple pendulum of length L when damping is negligible?
Cevap
T = 2π√(L/g). The simple-pendulum model uses a point-like bob on a light, inextensible string with a fixed support; bob mass doesn't affect the period.
Kart 333
Soru
If x(t) is at a positive maximum at t = 0, what qualitative pattern follows over one cycle?
Cevap
It crosses equilibrium moving negative at T/4, reaches negative maximum at T/2, returns through equilibrium at 3T/4, and reaches maximum positive displacement at T.
Kart 334
Soru
At equilibrium, how are a horizontal ideal spring oscillator's energies divided?
Cevap
Kinetic energy is maximum and spring potential energy is minimum. With x measured from equilibrium, U_s = 0 at x = 0.
Kart 335
Soru
An SHM object is at negative displacement and moving toward equilibrium. What signs do velocity and acceleration have if positive is right?
Cevap
Both are positive. Motion and restoring acceleration point right toward equilibrium.
Kart 336
Soru
How does a pendulum's period change if its length becomes nine times as large?
Cevap
The period triples. T is proportional to √L.
Kart 337
Soru
If SHM starts at maximum positive displacement, what equation gives its position?
Cevap
x(t) = A cos(2πft). A is amplitude, f is frequency, and t is elapsed time.
Kart 338
Soru
What feature would rule out ideal SHM in a force-versus-displacement-from-equilibrium graph?
Cevap
A restoring-force relationship that is not a straight line through the origin over the motion's range. Ideal SHM needs F ∝ -x.
Kart 339
Soru
At a horizontal ideal spring oscillator's turning points, how are kinetic and spring potential energy divided?
Cevap
Kinetic energy is zero and spring potential energy is maximum. The object momentarily stops at |x| = A.
Kart 340
Soru
For the same ideal spring with negligible damping and spring mass, which graph can determine k from measured periods and attached masses?
Cevap
Graph T² versus m. For T = 2π√(m/k), the slope is 4π²/k.
Kart 341
Soru
What makes a substance a fluid?
Cevap
It deforms continuously under a shear force and takes the shape of its container. Liquids and gases are fluids.
Kart 342
Soru
What is mass density?
Cevap
Mass per volume: ρ = m/V. Its SI unit is kg/m³.
Kart 343
Soru
For pressure that is uniform over a surface patch, how is it related to normal force and area?
Cevap
P = F_perpendicular/A. Pressure is a scalar field even though the contact force has direction.
Kart 344
Soru
What is volume flow rate?
Cevap
Volume passing a cross-section per time: Q = ΔV/Δt. Its SI unit is m³/s.
Kart 345
Soru
What is the buoyant-force magnitude on an object immersed in a static fluid whose density is uniform over the displaced volume?
Cevap
The weight of the displaced fluid: F_B = ρ_fluid gV_displaced. Here ρ_fluid is the uniform density over that volume.
Kart 346
Soru
What conditions support the basic Bernoulli model used here?
Cevap
Steady, incompressible, nonviscous flow along the compared flow path, with a completely filled pipe unless stated otherwise. Incompressible means a moving fluid element's density stays effectively constant. Pumps or major dissipative effects require extra terms.
Kart 347
Soru
Under the ideal model, how does average density predict whether a free object floats or sinks?
Cevap
It floats if its average density is less than the fluid's and sinks if it is greater. Equal average density gives neutral buoyancy when fully submerged; assume no support or other external force.
Kart 348
Soru
How are volume flow rate, cross-sectional area, and average fluid speed normal to that area related?
Cevap
Q = Av. This gives the volume crossing a completely filled pipe section per time.
Kart 349
Soru
How does a static fluid exert force on a surface?
Cevap
Many particle–surface interactions produce a net force perpendicular to the surface. A static fluid does not exert a tangential shear force.
Kart 350
Soru
How does pressure change with depth in a static uniform fluid?
Cevap
It increases by ΔP = ρgΔh. Greater depth means more fluid weight above each unit area.
Kart 351
Soru
What force balance holds for an object floating at rest when buoyancy and weight are its only vertical forces?
Cevap
F_B = mg. The object's weight equals the weight of the fluid it displaces.
Kart 352
Soru
What is the continuity equation for steady incompressible flow in one filled pipe?
Cevap
A₁v₁ = A₂v₂. The same volume flow rate passes each cross-section.
Kart 353
Soru
Why does a static fluid produce an upward buoyant force?
Cevap
Pressure is greater on the object's lower surfaces than on its upper surfaces. The vertical pressure forces do not cancel.
Kart 354
Soru
What is the absolute pressure at depth h below the open surface of a static, uniform liquid?
Cevap
P_abs = P_atm + ρgh. ρgh is the gauge pressure from the liquid column.
Kart 355
Soru
Immediately after a fully submerged object is released in a static, uniform ideal fluid, which way does it accelerate if its average density exceeds the fluid density and only weight and buoyancy act?
Cevap
Downward. Weight exceeds buoyant force, so the initial net force and acceleration point downward.
Kart 356
Soru
Water's average speed normal to a 0.020 m² pipe cross-section is 3 m/s. What is the volume flow rate?
Cevap
0.060 m³/s. Q = Av = 0.020×3.
Kart 357
Soru
What does the slope of a mass-versus-volume graph represent for one uniform material?
Cevap
Density. Since m = ρV, the line's slope is ρ.
Kart 358
Soru
How do gauge pressure and absolute pressure differ?
Cevap
Gauge pressure is measured relative to atmospheric pressure; absolute pressure is measured relative to vacuum. P_abs = P_atm + P_gauge.
Kart 359
Soru
For a fully submerged rigid object in a static, incompressible, uniform fluid, does buoyant force increase with depth?
Cevap
No. Displaced volume, fluid density, and g stay constant, so F_B stays constant despite higher absolute pressure.
Kart 360
Soru
For steady incompressible flow in a filled pipe, what happens to speed if cross-sectional area halves?
Cevap
It doubles. Continuity keeps Av constant.
Kart 361
Soru
When does a fluid element's velocity change?
Cevap
Its velocity changes when a nonzero net force acts on it. Pressure forces and gravity can contribute to that net force.
Kart 362
Soru
For steady, incompressible, nonviscous flow along the same flow path, what does Bernoulli's equation express?
Cevap
Conservation of mechanical energy per unit volume. Along that flow path, P + ½ρv² + ρgy stays constant under the stated conditions.
Kart 363
Soru
For a uniform object floating at rest in a uniform-density fluid with buoyancy and weight as its only vertical forces, what fraction of its volume is submerged?
Cevap
V_sub/V_object = ρ_object/ρ_fluid. A less-dense object floats with a smaller fraction submerged.
Kart 364
Soru
For steady incompressible flow in a filled pipe, what happens to speed if pipe radius halves?
Cevap
It becomes four times as large. Area is proportional to radius squared.
Kart 365
Soru
What does Pascal's principle say for a confined incompressible fluid at rest?
Cevap
An applied pressure change is transmitted throughout the fluid. The same pressure change acts at every connected point.
Kart 366
Soru
In a uniform static fluid, what does the slope of gauge pressure versus depth represent?
Cevap
ρg. For known g, the slope can determine fluid density.
Kart 367
Soru
Immediately after a fully submerged object is released in a static, uniform ideal fluid, which way does it accelerate if its average density is less than the fluid density and only weight and buoyancy act?
Cevap
Upward. Buoyant force exceeds weight, so the initial net force and acceleration point upward.
Kart 368
Soru
For steady incompressible flow in a filled pipe, area narrows from 0.040 m² to 0.010 m². If initial speed is 2 m/s, what is final speed?
Cevap
8 m/s. Continuity gives v₂ = A₁v₁/A₂.
Kart 369
Soru
What physical quantity does each term in P + ½ρv² + ρgy share?
Cevap
Energy per unit volume, equivalent to pressure. Every term uses units of pascals.
Kart 370
Soru
In one static fluid of uniform density, what experimental graph could test F_B = ρ_fluid gV_displaced?
Cevap
Graph measured buoyant force versus displaced volume. A line with slope near ρ_fluid g supports the model.
Kart 371
Soru
A uniform object of density 750 kg/m³ floats at rest in uniform-density water of density 1000 kg/m³, with buoyancy and weight as its only vertical forces. What fraction is submerged?
Cevap
0.75, or 75%. Use the density ratio for floating equilibrium.
Kart 372
Soru
A main pipe splits into two outlets during steady incompressible flow. What flow-rate relation holds?
Cevap
Incoming flow rate equals the sum of outgoing flow rates. Q_in = Q_out,1 + Q_out,2.
Kart 373
Soru
For steady, incompressible, nonviscous efflux with negligible losses, what is Torricelli's speed for an opening a vertical distance h below a large open surface?
Cevap
v = √(2gh). Both locations are open to atmospheric pressure, and the large surface makes the upper-fluid speed negligible.
Kart 374
Soru
Why does the same force create more pressure on a smaller area?
Cevap
Pressure is inversely proportional to area for fixed perpendicular force. Concentrating the force raises F/A.
Kart 375
Soru
A sample has mass 0.60 kg and volume 2.0×10⁻⁴ m³. What is its density?
Cevap
3.0×10³ kg/m³. Divide mass by volume.
Kart 376
Soru
What conservation law underlies the continuity equation for incompressible flow?
Cevap
Conservation of mass. Constant density turns equal mass flow into equal volume flow.
Kart 377
Soru
An immersed object rests on a scale that exerts an upward support force. If weight, buoyancy, and that support are its only vertical forces, with mg ≥ F_B, how is apparent weight related to buoyant force?
Cevap
N = mg - F_B. Here N is the upward scale-force magnitude. The fluid supports part of the object's weight, so the scale reading is no greater than its weight under the stated condition.
Kart 378
Soru
What is the SI unit of pressure?
Cevap
The pascal, Pa. One pascal equals 1 N/m².
Kart 379
Soru
How do pressures compare at the same horizontal level in one connected static fluid?
Cevap
They are equal. Container shape does not change pressure at a fixed elevation.
Kart 380
Soru
What does specific gravity compare?
Cevap
A substance's density with water's density. It is a dimensionless ratio, commonly ρ_substance/ρ_water.
Kart 381
Soru
How could collecting outflow test a volume flow rate predicted from area and average normal speed?
Cevap
Measure collected volume over a timed interval and compare ΔV/Δt with Av. Repeat trials and include volume and timing uncertainty.
Kart 382
Soru
How does the particle model distinguish a fluid from a rigid solid?
Cevap
Fluid particles can rearrange and flow past one another. A rigid solid resists sustained shape change.
Kart 383
Soru
At equal height along the same flow path in steady, incompressible, nonviscous flow, how are pressure and speed related?
Cevap
The faster region has lower static pressure. Along that flow path at equal height, P + ½ρv² remains constant.
Kart 384
Soru
A fully submerged object displaces 0.020 m³ of static water. Using ρ = 1000 kg/m³ and g = 10 m/s², what is F_B?
Cevap
200 N. F_B = ρgV = 1000×10×0.020.
Kart 385
Soru
Why can a steel ship float even though steel is denser than water?
Cevap
Its hollow shape makes the ship's overall average density less than water. It displaces enough water for buoyant force to balance weight.
Kart 386
Soru
How does an ideal hydraulic lift with a confined incompressible fluid at rest multiply force?
Cevap
Equal pressure change gives F₁/A₁ = F₂/A₂. The larger-area piston produces the larger force.
Kart 387
Soru
For steady, incompressible, nonviscous efflux with negligible losses, what graph can test Torricelli's relation while fluid head h varies?
Cevap
Graph v² versus h. With both locations open to atmospheric pressure and upper-surface speed negligible, the model predicts slope 2g.
Kart 388
Soru
What does incompressible mean in the introductory ideal-fluid model?
Cevap
A fluid element's density stays effectively constant as it moves. Its volume does not appreciably shrink under pressure changes.
Kart 389
Soru
At two points along the same flow path in steady, incompressible, nonviscous flow, how are pressure and height related when speed is equal?
Cevap
Pressure is lower at the higher point. P + ρgy remains constant.
Kart 390
Soru
How can water displacement measure an irregular solid's volume?
Cevap
Submerge it fully and measure the increase in displaced-water volume. The volume change equals the submerged solid's volume if no water enters it.
Kart 391
Soru
Two equal-volume samples have densities ρ and 3ρ. How do their masses compare?
Cevap
The denser sample has three times the mass. From m = ρV, mass scales with density at fixed volume.
Kart 392
Soru
How can scale readings in air and water determine buoyant force?
Cevap
Subtract the immersed scale reading from the air reading. When the object is at rest and air buoyancy is negligible, the decrease equals the liquid's buoyant force.
Kart 393
Soru
Static water has ρ = 1000 kg/m³. Using g = 10 m/s², what gauge pressure is 3 m below its open surface?
Cevap
30,000 Pa. P_gauge = ρgh = 1000×10×3.
Kart 394
Soru
During steady incompressible outflow, why can a large tank's top-surface speed be neglected compared with outlet speed?
Cevap
The tank's surface area is much larger than the outlet area. Continuity then makes the top-surface speed much smaller.
Kart 395
Soru
For a chosen fluid element in a horizontal region, what can a pressure difference do?
Cevap
It creates a net pressure force from higher pressure toward lower pressure and can accelerate the element by Newton's second law. Other forces must also be included when they matter.
Kart 396
Soru
How can buoyancy measurements in a static fluid of known uniform density determine an irregular object's volume?
Cevap
Measure buoyant force while the object is fully submerged, then use V = F_B/(ρ_fluid g). The fluid density must be uniform over the displaced volume.
Kart 397
Soru
A 200 N perpendicular force acts on area 0.040 m². What pressure does it create?
Cevap
5,000 Pa. P = F/A = 200/0.040.
Kart 398
Soru
Why doesn't a hydraulic lift multiply energy?
Cevap
The large-force piston moves a shorter distance. Ideally, input work equals output work.
Kart 399
Soru
A large open tank has steady, incompressible, nonviscous efflux with negligible losses. Using g = 10 m/s², what speed leaves an opening 5 m below the surface when upper-surface speed is negligible?
Cevap
10 m/s. Both locations are at atmospheric pressure, so v = √(2gh) = √100.
Kart 400
Soru
An object floats first in water and then in a denser liquid. How does its submerged fraction change?
Cevap
It decreases in the denser liquid. Less displaced volume is needed to provide the same buoyant force.

An orange sphere traces an orbital path between a wave, a rotating disc, and a fluid ripple on a dark grid.

400 kart